Air & Fuel Delivery

Air & Fuel Delivery

edelbrock-turbo.jpg

No skimping....more air in,more fuel in, more power out

  • Satin finish. The 85mm throttle body for 1998-2002 LS1/LS6 Camaro and Firebird is typically suitable for use on Professional Products 52060/52061 LS1 Typhoon intake manifolds as well as other LS1 aftermarket intakes. This throttle body features die cast aluminum construction and are O.E. quality units. Utilizes an aluminum transition plate that bolts between the stock manifold and the throttle body. This transition plate smooth the flow of air when using the throttle body on a manifold that has an inlet opening smaller than the throttle body. These units are a direct bolt-in replacement for the stock throttle body. Our throttle body also fits 2004 Pontiac GTO and full size 4.8, 5.3 & 6.0 engines with cable style throttle linkage.

    85MM Throttle Body - LS1/LS6

    Professional Products

    MSRP: $299.99
    $209.99
    Satin finish. The 85mm throttle body for 1998-2002 LS1/LS6 Camaro and Firebird is typically suitable for use on Professional Products 52060/52061 LS1 Typhoon intake manifolds as well as other LS1 aftermarket intakes. This throttle body features die cast...
    MSRP: $299.99
    $209.99
  • Here is a great replacement for the truck intake! Save money, stuff your truck motor under the hood of your car without having to go to a more expensive car-style intake. This intake allows you to continue using the truck accessories.



Not only do you gain underhood room, but you gain some HP as well. Another beautiful thing: this intake comes complete with 92mm throttle body, fuel rails, braided connecting hose, fittings, throttle cable, cable bracket, and all gaskets and hardware
Here is a great replacement for the truck intake! Save money, stuff your truck motor under the hood of your car without having to go to a more expensive car-style intake. This intake allows you to continue using the truck accessories.



Not only do you gain underhood room, but you gain some HP as well. Another beautiful thing: this intake comes complete with 92mm throttle body, fuel rails, braided connecting hose, fittings, throttle cable, cable bracket, and all gaskets and hardware

    92MM LSx Sheetmetal Intake

    LSxEverything

    MSRP: $949.99
    $699.99
    Here is a great replacement for the truck intake! Save money, stuff your truck motor under the hood of your car without having to go to a more expensive car-style intake. This intake allows you to continue using the truck accessories. Not only do you...
    MSRP: $949.99
    $699.99
  • Throttle Body, Drive-By-Wire, Billet Aluminum, Natural, 102mm, Chevy, Each

Throttle Body, Drive-By-Wire, Billet Aluminum, Natural, 102mm, Chevy, Each

    DBW Throttle Body | Drive By Wire

    Nick Williams Performance

    MSRP: $899.99
    $669.99
    Nick Williams Performance drive-by-wire throttle bodies are CNC precision-machined from billet aluminum to meet the demands for increased airflow on the drive-by-wire LSX performance engines. The 102mm throttle bodies require an aftermarket intake to fit...
    MSRP: $899.99
    $669.99
  • Sold as a kit.
FiTech Retro LS EFI 600 hp fuel injection systems offer a "golden" opportunity for impressive looks and performance. These classic gold engine-toppers with transmission control are complete throttle body kits, suitable for everything from your junkyard 5.3 to a Stroker 427—and they deliver old-school carburetor looks with EFI technology and reliability. Whether a do-it-yourself hot rodder or professional EFI tuner, the features of the FiTech Retro LS EFI 600 hp system are sure to inspire you.

FitTech Retro LS complete self-tuning induction kits include:

* Classic gold die-cast throttle body 
* Hand-held controller
* Windshield mount 
* Wideband oxygen sensor
* Coolant temperature sensor
* Self-learning ECU

Features and benefits:

* Wet flow technology and swirl spray annular discharge for complete atomization
* Windshield-mount for control
* Flow-matched 80 lb. injectors
* Self-learning ECU with touchscreen controller for easy setup and configuration
* Semi-sequential fuel and full spark control
* Bosch wideband controlled (self-learning) 
* 24X and 58X crank and cam compatible
* 1 BAR MAP sensor—TPS-IAC sensor
* Speedometer Output Driver for most speedometers
* On-the-fly programmable target air/fuel ratios and timing
* Custom camshaft-friendly
* Knock sensor control
* Available transmission control feature is suitable for 4L60, 4L65, or 4L80 GM transmissions
* Compatible with E-85 gasoline
* All Go-EFI's feature voltage control fuel pump control. This feature reduces the voltage to the pump under low-load conditions such as idle and cruise, thus reducing noise and heat. This will extend the life of your pump and keep the fuel in the tank cooler and your ears from ringing. Sold as a kit.
FiTech Retro LS EFI 600 hp fuel injection systems offer a "golden" opportunity for impressive looks and performance. These classic gold engine-toppers with transmission control are complete throttle body kits, suitable for everything from your junkyard 5.3 to a Stroker 427—and they deliver old-school carburetor looks with EFI technology and reliability. Whether a do-it-yourself hot rodder or professional EFI tuner, the features of the FiTech Retro LS EFI 600 hp system are sure to inspire you.

FitTech Retro LS complete self-tuning induction kits include:

* Classic gold die-cast throttle body 
* Hand-held controller
* Windshield mount 
* Wideband oxygen sensor
* Coolant temperature sensor
* Self-learning ECU

Features and benefits:

* Wet flow technology and swirl spray annular discharge for complete atomization
* Windshield-mount for control
* Flow-matched 80 lb. injectors
* Self-learning ECU with touchscreen controller for easy setup and configuration
* Semi-sequential fuel and full spark control
* Bosch wideband controlled (self-learning) 
* 24X and 58X crank and cam compatible
* 1 BAR MAP sensor—TPS-IAC sensor
* Speedometer Output Driver for most speedometers
* On-the-fly programmable target air/fuel ratios and timing
* Custom camshaft-friendly
* Knock sensor control
* Available transmission control feature is suitable for 4L60, 4L65, or 4L80 GM transmissions
* Compatible with E-85 gasoline
* All Go-EFI's feature voltage control fuel pump control. This feature reduces the voltage to the pump under low-load conditions such as idle and cruise, thus reducing noise and heat. This will extend the life of your pump and keep the fuel in the tank cooler and your ears from ringing.

    Retro LS EFI 600 HP Fuel Injection System

    FiTech

    MSRP: $1,999.99
    $1,599.99
    FiTech Retro LS EFI 600 hp fuel injection systems offer a "golden" opportunity for impressive looks and performance. These classic gold engine-toppers with transmission control are complete throttle body kits, suitable for everything from your junkyard 5...
    MSRP: $1,999.99
    $1,599.99
  • Hi-Ram Sheet Metal Fabricated Intake Manifold LS3/L92 92mm Throttle Body opening + Fuel Rail Kit Silver with Sniper EFI logo Hi-Ram Sheet Metal Fabricated Intake Manifold LS3/L92 92mm Throttle Body opening + Fuel Rail Kit Silver with Sniper EFI logo

    Sniper Hi-Rise EFI Intake

    Holley

    MSRP: $799.99
    $604.99
    Now you can upgrade your LS3/L92 Engine Intakes on a budget Features: 3mm (1/8") thick T6061 Sheet Aluminum construction, more durable than competitive intakes Available in 92mm and 102mm bore Throttle Body Openings 100% TIG welded Available for...
    MSRP: $799.99
    $604.99
  • Holley is now offering budget friendly fabricated intake manifolds for your LSx swap. This is for the LS3/L92.
Features:
3mm (1/8") thick T6061 Sheet Aluminum construction, more durable than competitive intakes
Available in 92mm and 102mm bore Throttle Body Openings
100% TIG welded
Available for EFI and Carbureted applications with custom Holley Sniper logo
EFI Intakes include 3/8" Fuel rail kits (Sniper logo laser engraved)
Runner lengths with tapered top on EFI intakes designed to increase velocity and more evenly distribute airflow to all 8 cylinders Holley is now offering budget friendly fabricated intake manifolds for your LSx swap. This is for the LS3/L92.
Features:
3mm (1/8") thick T6061 Sheet Aluminum construction, more durable than competitive intakes
Available in 92mm and 102mm bore Throttle Body Openings
100% TIG welded
Available for EFI and Carbureted applications with custom Holley Sniper logo
EFI Intakes include 3/8" Fuel rail kits (Sniper logo laser engraved)
Runner lengths with tapered top on EFI intakes designed to increase velocity and more evenly distribute airflow to all 8 cylinders

    Sniper Hi-Rise EFI Intake | Blk

    Holley

    MSRP: $799.99
    $599.99
    Holley is now offering budget friendly fabricated intake manifolds for your LSx swap. This is for the LS3/L92. Features: 3mm (1/8") thick T6061 Sheet Aluminum construction, more durable than competitive intakes Available in 92mm and 102mm bore...
    MSRP: $799.99
    $599.99
  • SNIPER EFI LS1/2/6 HI-RAM IM, EFI,102MM LOW PROFLE

SNIPER EFI LS1/2/6 HI-RAM IM, EFI,102MM LOW PROFLE

    Sniper Low-Rise EFI Intake

    Holley

    MSRP: $799.99
    $604.99
    Holley Sniper Fabricated Manifolds continues to push the aftermarket by introducing Low Profile intakes for GM LS Engines. These Intakes are a good looking, perform well, and offer an extremely good value for a performance sheet metal style intake...
    MSRP: $799.99
    $604.99