Chevy/GMC Truck | 55-19+

Chevy/GMC Truck | 55-19+

Chevy/GMC Truck | 55-19+

1955-2019 Chevy/GMC Truck Lovers - get all of the things that you need to lower and stop your Chevy Truck. Please click the picture of your year truck below to access the components available. If you are looking for air ride suspension and other lowering parts, please click here.

2013-killswitch-show-coverage-95-88-98-chevy.jpg

 

 

 

 

  • This is the turbo kit you have been looking for! 
Now you have the perfect option for your under powered Chevy/GMC Truck! Tired of not being able to get your dually out of its own way? Now you have the right option, and you don't need a Cummins to get it done and have that sound! LS Swap it and GO TURBO! Please note that for best results, you will want to use our Motor Mounts for your swap.

Perfect Fitment. Keeps All Stock Parts and Accessories. MAF Sensor Wires May Need to Be Cut and Extended.
The standard kit comes with a single Big T4 Turbo Provision, Supports 700-800 WHP. The standard turbo is most efficient up to 18psi, the ball bearing turbos are efficient up to 22-35 psi each, depending on which version you get (ball bearing vs. billet ball bearing).
60mm Vband WG and 50mm BOV Provision
2.5" Cross Pipe
3" Turbo Downpipe then Enlarged to 3.5" Exhaust Pipe  

For Larger Vortec V8 (5.3L, 6.0L) with Built Motor and Larger Turbo, This Kit Supports 700-800 WHP with the standard turbo. Expect more with the Turbo Upgrades and intercooler.  Don't forget to your fuel injector upgrade

 Includes:

-T76 Turbo, with Filter
-Turbo Headers + Cross Pipe (3 pieces)
-Downpipe (3 pieces)
-Dump Pipe (1 piece)
-Wastegate
-2.5'' Vband Clamp x2
-3'' Vband Clamp x3
-T4 Turbo Elbow Adapter x1
-Oil Line Kit

Product Info and Specs:

Manifold:
-Custom designed for 4.8/5.3/6.0. Keeps All Stock Parts and Accessories Stainless Steel 1.65" Runner Tube
-T4 Turbo Elbow Adapter. Flexible Fitment For Many Turbos.
-60mm Vband Wastegate Provision
-2.5" Cross Pipe with Vband Connections
-Comes with 60mm WG Dump Tube
Downpipe:
-2 pcs 3" Downpipe Connects to Turbo (Fits Turbo with 3" Vband Exhaust Outlet)
-3.5" Straight Exhaust Pipe

T4 Turbo and Wastegate:
-4" Air Inlet
-2.5" Compressed Air Outlet
-Wet Floating Bearings
-Standard T4 Flange
-76mm Wheel Compressor
-.81 A/R Turbine
-3" V-band Hot Side
-60 mm 12Psi V-Band Wastegate
Note:

Intercooler Kit Upgrade is available from the dropdown menu above. Please select your intercooler size, and it will be added to your turbo kit.

-Exhaust Pipe Is 3.5 Straight Pipe, It Does NOT Have Flange Welded, You Will Need To Fabricate the Rest of the Exhaust System.
-Off Road or Track Use ONLY, NOT for Street Use. This is the turbo kit you have been looking for! 
Now you have the perfect option for your under powered Chevy/GMC Truck! Tired of not being able to get your dually out of its own way? Now you have the right option, and you don't need a Cummins to get it done and have that sound! LS Swap it and GO TURBO! Please note that for best results, you will want to use our Motor Mounts for your swap.

Perfect Fitment. Keeps All Stock Parts and Accessories. MAF Sensor Wires May Need to Be Cut and Extended.
The standard kit comes with a single Big T4 Turbo Provision, Supports 700-800 WHP. The standard turbo is most efficient up to 18psi, the ball bearing turbos are efficient up to 22-35 psi each, depending on which version you get (ball bearing vs. billet ball bearing).
60mm Vband WG and 50mm BOV Provision
2.5" Cross Pipe
3" Turbo Downpipe then Enlarged to 3.5" Exhaust Pipe  

For Larger Vortec V8 (5.3L, 6.0L) with Built Motor and Larger Turbo, This Kit Supports 700-800 WHP with the standard turbo. Expect more with the Turbo Upgrades and intercooler.  Don't forget to your fuel injector upgrade

 Includes:

-T76 Turbo, with Filter
-Turbo Headers + Cross Pipe (3 pieces)
-Downpipe (3 pieces)
-Dump Pipe (1 piece)
-Wastegate
-2.5'' Vband Clamp x2
-3'' Vband Clamp x3
-T4 Turbo Elbow Adapter x1
-Oil Line Kit

Product Info and Specs:

Manifold:
-Custom designed for 4.8/5.3/6.0. Keeps All Stock Parts and Accessories Stainless Steel 1.65" Runner Tube
-T4 Turbo Elbow Adapter. Flexible Fitment For Many Turbos.
-60mm Vband Wastegate Provision
-2.5" Cross Pipe with Vband Connections
-Comes with 60mm WG Dump Tube
Downpipe:
-2 pcs 3" Downpipe Connects to Turbo (Fits Turbo with 3" Vband Exhaust Outlet)
-3.5" Straight Exhaust Pipe

T4 Turbo and Wastegate:
-4" Air Inlet
-2.5" Compressed Air Outlet
-Wet Floating Bearings
-Standard T4 Flange
-76mm Wheel Compressor
-.81 A/R Turbine
-3" V-band Hot Side
-60 mm 12Psi V-Band Wastegate
Note:

Intercooler Kit Upgrade is available from the dropdown menu above. Please select your intercooler size, and it will be added to your turbo kit.

-Exhaust Pipe Is 3.5 Straight Pipe, It Does NOT Have Flange Welded, You Will Need To Fabricate the Rest of the Exhaust System.
-Off Road or Track Use ONLY, NOT for Street Use.

    1964-1991 GM Truck Turbo Kit

    LSxEverything

    MSRP: $3,999.00
    $2,999.99
    This is the turbo kit you have been looking for! Now you have the perfect option for your under powered Chevy/GMC Truck! Tired of not being able to get your dually out of its own way? Now you have the right option, and you don't need a Cummins to...
    MSRP: $3,999.00
    $2,999.99
  • Turbo & Intercooler Piping Kit For 2007-2014 Cadillac Escalade 6.2L V8 AWD & Other Trucks  
Finally! You can boost your Chevy/GMC/Cadillac Truck or SUV! Make that human hauler SCOOT!
    Big T76 Turbo Supports 600-700 HP Depends on Engine Build and Boost Level
    60mm 12 PSI Wastegate
    Big 4" Core Intercooler, with Aluminum Mounting Brackets, Perfect Fitment, No Cut
    Mandrel Bent 3" Aluminum Piping Kit, with 50mm BOV
    3" Stainless Steel Header Cross Pipe and Downpipe. 

Items in the Kit
 Turbo Manifold Downpipe Kit 
 Turbocharger 
 Oil Filter Sandwich and Oil Line Kit 
 Air Filter 
 60mm 12PSI V-band Wastegate 
 Set of V-band Clamp
 Intercooler with Mounting Brackets 
 Piping Kit with Hoses and Clamps 
 BOV 

Turbo & Intercooler Piping Kit For 2007-2014 Cadillac Escalade 6.2L V8 AWD & Other Trucks  
Finally! You can boost your Chevy/GMC/Cadillac Truck or SUV! Make that human hauler SCOOT!
    Big T76 Turbo Supports 600-700 HP Depends on Engine Build and Boost Level
    60mm 12 PSI Wastegate
    Big 4" Core Intercooler, with Aluminum Mounting Brackets, Perfect Fitment, No Cut
    Mandrel Bent 3" Aluminum Piping Kit, with 50mm BOV
    3" Stainless Steel Header Cross Pipe and Downpipe. 

Items in the Kit
 Turbo Manifold Downpipe Kit 
 Turbocharger 
 Oil Filter Sandwich and Oil Line Kit 
 Air Filter 
 60mm 12PSI V-band Wastegate 
 Set of V-band Clamp
 Intercooler with Mounting Brackets 
 Piping Kit with Hoses and Clamps 
 BOV

    2007-2014 Escalade Turbo Kit

    LSxEverything

    MSRP: $4,499.99
    $2,999.99
    Turbo & Intercooler Piping Kit For 2007-2014 Cadillac Escalade 6.2L V8 AWD & Other Trucks  Finally! You can boost your Chevy/GMC/Cadillac Truck or SUV! Make that human hauler SCOOT!    Big T76 Turbo Supports 600-700...
    MSRP: $4,499.99
    $2,999.99
  • Manual Transmission, '99-'07 GM Silverado & Sierra 1500 5 speed, 2WD, integral bell housing, 1 shift rail

* A pre-inspection is done to ensure the unit is free of case cracks, excessive wear and to catch other OEM related problems that many cores have
* A second inspection is conducted during the remanufacturing process to ensure all component parts meet OEM specifications
* A final post-build inspection is done to ensure unit is built to their strict standards
* All units are quality inspected throughout the remanufacturing process to maintain our quality standard
* All housing and top covers are cleaned utilizing their state-of-the-art hydro-blasting and rinsing process--this brings all cases back to the OEM finish
* 100 percent inspection of internal parts, including gear wear checks, main shaft straightness test and synchronizer testing 
* 100 percent replacement of seals, bearings, and other common wear components
* Units are shipped in high-density plastic totes to help eliminate in-transit damage
* All transfer cases are sold with a standard 2 year/unlimited mileage warranty

Manual Transmission, '99-'07 GM Silverado & Sierra 1500 5 speed, 2WD, integral bell housing, 1 shift rail

* A pre-inspection is done to ensure the unit is free of case cracks, excessive wear and to catch other OEM related problems that many cores have
* A second inspection is conducted during the remanufacturing process to ensure all component parts meet OEM specifications
* A final post-build inspection is done to ensure unit is built to their strict standards
* All units are quality inspected throughout the remanufacturing process to maintain our quality standard
* All housing and top covers are cleaned utilizing their state-of-the-art hydro-blasting and rinsing process--this brings all cases back to the OEM finish
* 100 percent inspection of internal parts, including gear wear checks, main shaft straightness test and synchronizer testing 
* 100 percent replacement of seals, bearings, and other common wear components
* Units are shipped in high-density plastic totes to help eliminate in-transit damage
* All transfer cases are sold with a standard 2 year/unlimited mileage warranty

    5-Speed Manual Transmission

    Chevrolet Performance

    $1,400.00
      Manual Transmission, '99-'07 GM Silverado & Sierra 1500 5 speed, 2WD, integral bell housing, 1 shift rail * A pre-inspection is done to ensure the unit is free of case cracks, excessive wear and to catch other OEM related problems that many...
    $1,400.00
  • McGaughy's lowering coil springs are designed to lower your truck 1 to 4 inch They are built from chromium alloy steel and are wound, shot-peened, and powdercoated to exacting specifications to ensure proper ride height, ride quality, and long life. McGaughy's lowering coil springs will easily replace the stock springs and give your vehicle the stance you have been looking for. Please select the size you need for the rear. They are all the same price.

    60-72 C-10 Rear Drop Coils | 3" or 4"

    McGaughy's

    MSRP: $199.99
    $134.99
    McGaughy's lowering coil springs are designed to lower the rear of your truck 3 to 4 inches. They are built from chromium alloy steel and are wound, shot-peened, and powdercoated to exacting specifications to ensure proper ride height, ride quality,...
    MSRP: $199.99
    $134.99
  • On Sale
    1963-1970 Chevy/GMC Truck C-10
2WD, 1/2 Ton

Description and Features:

Big Brake 13" Front Kit
13" Cross Drilled Rotors
2.5" Drop Spindles
Hubs
GM Calipers
Brackets
Bearings
Seals
Hoses
Banjo Bolts
Dust Caps
Spindle Nut/Washer
Cotter Pins
5 x 5"

Must use 17" or larger wheels in order to use the spindles. Factory 17" wheels will work with a slight modification, aftermarket cast 17" wheels likely won't work. 1963-1970 Chevy/GMC Truck C-10
2WD, 1/2 Ton

Description and Features:

Big Brake 13" Front Kit
13" Cross Drilled Rotors
2.5" Drop Spindles
Hubs
GM Calipers
Brackets
Bearings
Seals
Hoses
Banjo Bolts
Dust Caps
Spindle Nut/Washer
Cotter Pins
5 x 5"

Must use 17" or larger wheels in order to use the spindles. Factory 17" wheels will work with a slight modification, aftermarket cast 17" wheels likely won't work.

    63-70 C10 | 13" Cross Drilled Big Brake Kit

    McGaughy's

    MSRP: $999.99
    Now: $879.99
    Was: $1,249.99
    Applications: 1963-1970 Chevy/GMC Truck C-102WD, 1/2 Ton Description and Features: Big Brake 13" Front Kit13" Cross Drilled Rotors2.5" Drop SpindlesHubsGM CalipersBracketsBearingsSealsHosesBanjo BoltsDust CapsSpindle Nut/WasherCotter Pins5 x 5" Must...
    MSRP: $999.99
    Now: $879.99
    Was: $1,249.99
  • On Sale
    63-70 C-10, 13" FRONT DISC KIT, W/ 2.5" SPINDLES, (5x4.75), (MUST USE 17"+ RIMS). Click product description for additional information. 63-70 C-10, 13" FRONT DISC KIT, W/ 2.5" SPINDLES, (5x4.75), (MUST USE 17"+ RIMS). Click product description for additional information.

    63-70 C10 | 13" Solid Rotor Big Brake Kit

    McGaughy's

    MSRP: $899.99
    Now: $749.99
    Was: $999.99
    Applications: 1963-1970 Chevy/GMC Truck C-102WD, 1/2 Ton Description and Features: Big Brake 13" Front Kit13" Rotors2.5" Drop SpindlesHubsGM CalipersBracketsBearingsSealsHosesBanjo BoltsDust CapsSpindle Nut/WasherCotter Pins5 x 4.75" Must use 17" or...
    MSRP: $899.99
    Now: $749.99
    Was: $999.99
  • On Sale
    63-70 C-10, 13" FRONT DISC KIT W/2.5" SPINDLES **CROSS DRILLED** (5 ON 4.75")
(MUST USE 17"+ RIMS)

 Click product description for additional information. 63-70 C-10, 13" FRONT DISC KIT W/2.5" SPINDLES **CROSS DRILLED** (5 ON 4.75")
(MUST USE 17"+ RIMS)

 Click product description for additional information.

    63-70 C10 | 13" X-Drilled Big Brake Kit

    McGaughy's

    MSRP: $999.99
    Now: $899.99
    Was: $1,299.99
    Applications: 1963-1970 Chevy/GMC Truck C-102WD, 1/2 Ton Description and Features: Big Brake 13" Front Kit13" Rotors2.5" Drop SpindlesHubsGM CalipersBracketsBearingsSealsHosesBanjo BoltsDust CapsSpindle Nut/WasherCotter Pins5 x 4.75" Must use 17" or...
    MSRP: $999.99
    Now: $899.99
    Was: $1,299.99