Converters/Diffs/Rear Ends

Converters/Diffs/Rear Ends

detroittt.jpg

Get rid of that one-wheel peel, get maximum traction, and enjoy your new-found power! Install a locker or limited slip differential in your hot rod, truck or off-road vehicle! Best money spent! And of course if you are modifying your engine, that torque converter can make or break your power to the transmission....do it right! Pick the right stall and converter for your needs! Need more room? Update your rear end! Do it now!

  • Breakaway Torque Converter GM 4L80-E Lock-up 6x Six-Speed High-Stall TCI Breakaway Torque Converters are designed for use in moderately modified street machines, weekend racers, and as daily driving use. Breakaway Torque Converters provide between 2400 to 2600 RPM flash stall without negatively affecting part-throttle driving. TCI has engineered these Breakaway Torque Converters to be efficient at highway cruising speeds and to launch hard at wide-open throttle. Each unit is built to meet or exceed OE specification and triple tested during assembly. Once all the prep work on the component parts has been completed, the impeller is welded to the front cover. Immediately following this process, a pair of dial indicators are employed on a rotating table to verify that the impeller body and pump drive hub remain true. Each unit is then pressurized and subjected to a leak test to confirm the integrity of all the weld seams. Lastly, each unit is computer balanced to reduce annoying and potentially damaging drivetrain vibrations that would occur from an unbalanced torque converter. That's Triple Tested so you can be confident you're getting a torque converter that's ready to roll.

Features

Furnace-brazed fins
Needle bearings
Hardened, pre-ground pump hub
Computer Balanced
Installed Hardware Included
Benefits

Harder launches
Quicker acceleration
Improved low-end power
Bolt-in (no modifications required)
1000+ RPM increase in stall over stock

    4L80E Performance Torque Converter

    TCI

    $1,088.99
    TCI Breakaway Torque Converters are designed for use in moderately modified street machines, weekend racers, and as daily driving use. Breakaway Torque Converters provide between 2400 to 2600 RPM flash stall without negatively affecting part-throttle...
    $1,088.99
  • Boss Hog Night Stalker Series torque converters can take you from towing to rock crawling. They are obtainable in four levels to perfect your performance needs and designed to handle as much as 500 horsepower. The Boss Hogs use Torrington-style incased bearings throughout, and ACC Performance four-corner tack welds the turbine and impeller fins to maintain strength and quality. From stock to mildly modified vehicles, the Stalker Series torque converters offer performance that is tough and reliable.

    4L80E Torque Converter | Performance Level I

    Boss Hog

    MSRP: $549.99
    $399.99
    Boss Hog Night Stalker Series torque converters can take you from towing to rock crawling. They are obtainable in four levels to perfect your performance needs and designed to handle as much as 500 horsepower. The Boss Hogs use Torrington-style incased...
    MSRP: $549.99
    $399.99
  • Hog Night Stalker Series torque converters can take you from towing to rock crawling. They are obtainable in four levels to perfect your performance needs and designed to handle as much as 500 horsepower. The Boss Hogs use Torrington-style incased bearings throughout, and ACC Performance four-corner tack welds the turbine and impeller fins to maintain strength and quality. From stock to mildly modified vehicles, the Stalker Series torque converters offer performance that is tough and reliable.

    4l80E | HD Performance Torque Converter

    Boss Hog

    MSRP: $499.99
    $345.99
    Hog Night Stalker Series torque converters can take you from towing to rock crawling. They are obtainable in four levels to perfect your performance needs and designed to handle as much as 500 horsepower. The Boss Hogs use Torrington-style incased...
    MSRP: $499.99
    $345.99
  • Direct-fit Currie 9 in. rear-end axle housing assemblies have OE mounting points designed specifically for your application. This means that you won't have to spend hours cutting and welding in order to install them. These assemblies are available with disc or drum brakes, axles, bearings, and seals--everything you need to upgrade your rear-end, courtesy of Currie Enterprises.

    9 in. Rear-End Housing | 31-Spline 56"

    Currie

    $1,299.00
    Direct-fit Currie 9 in. rear-end axle housing assemblies have OE mounting points designed specifically for your application. This means that you won't have to spend hours cutting and welding in order to install them. These assemblies are available with...
    $1,299.00
  • Direct-fit Currie 9 in. rear-end axle housing assemblies have OE mounting points designed specifically for your application. This means that you won't have to spend hours cutting and welding in order to install them. These assemblies are available with disc or drum brakes, axles, bearings, and seals--everything you need to upgrade your rear-end, courtesy of Currie Enterprises.

    9 in. Rear-End Housing | 31-Spline 58"

    Currie

    $1,299.00
    Direct-fit Currie 9 in. rear-end axle housing assemblies have OE mounting points designed specifically for your application. This means that you won't have to spend hours cutting and welding in order to install them. These assemblies are available with...
    $1,299.00
  • Building up something special and you need rear disc brakes, limited slip differential (PosiTrac) and the satisfaction of having your project having all of the new tech? Look no further. Check out the details below

Axle Assembly: Pre-Owned. 5 Year unlimited mileage warranty
MFG: Chevrolet (OEM)
Run and Inspected for Splits, Cracks, Tears in Boots (if applicable). Mounts and Housing Checked - Warranty Eligible
What's Included and What to Expect:
All of our Rear Ends are Shipped as Complete Assemblies. They include:
Left and Right Axles
Housing
Gears

    96 Impala Rear End Swap Kit

    LSxEverything

    $1,099.99
    Building up something special and you need rear disc brakes, limited slip differential (PosiTrac) and the satisfaction of having your project having all of the new tech? Look no further. Check out the details below Axle Assembly: Pre-Owned. 5 Year...
    $1,099.99
  • Atlas 2 Speed Transfer cases for standard Jeep JK Wrangler applications. Vehicle Type: Jeep JK 2007-11 Auto Trans Gear Ratio: 3.0:1 Ratio, Close to the Non Rubicon low range this ratio is primarily used for mud, sand, snow, & back roads, limited rock crawling #Atlas30 Yoke Option: 1310CV most common yoke used on the JK Atlas applications #A1310CV

    Atlas 2-Speed Transfer Case - JK

    Atlas

    MSRP: $3,699.99
    $2,999.99
    The Advance Adapters Atlas gear-driven transfer cases are the ultimate in gearing and strength. With over 20,000 units sold, the Atlas 2 speed is the solution for combining both on and off-road performance.  The name is legendary and synonymous...
    MSRP: $3,699.99
    $2,999.99
  • Atlas 4 Speed Transfer Case:

No other transfer case on the market today has 3 separate low range ratios built into a single unit. This transfer case was designed for the off road enthusiast that likes to tackle a large variety of terrain with one vehicle. Selecting one low range ratio that works well for mud, sand and rock crawling, is a compromise but the Atlas 4sp overcomes this limitation. One transfer case that is perfectly suited to any terrain that you may want to conquer. Atlas 4 Speed Transfer Case:

No other transfer case on the market today has 3 separate low range ratios built into a single unit. This transfer case was designed for the off road enthusiast that likes to tackle a large variety of terrain with one vehicle. Selecting one low range ratio that works well for mud, sand and rock crawling, is a compromise but the Atlas 4sp overcomes this limitation. One transfer case that is perfectly suited to any terrain that you may want to conquer.

    Atlas 4-Speed Transfer Case | Custom Built

    Atlas

    Atlas 4 Speed Transfer Case: No other transfer case on the market today has 3 separate low range ratios built into a single unit. This transfer case was designed for the off road enthusiast that likes to tackle a large variety of terrain with one...
    Quick view
  • Hook up with Auburn Gear High Performance series differentials and outperform the competition! These differentials deliver superior performance through a unique cone-clutch design that transfers more power to the high-traction wheel for quick acceleration and tight cornering. The Auburn High Performance limited-slip series is engineered to provide smooth torque-sensing operation with the correct bias ratios to meet your performance needs--whether they involve daily driving or muddy back roads. Plus, every gear unit is inspected and hand-assembled in America. No matter what you're driving, Auburn Gear High Performance series differentials will maximize your vehicle's traction for optimum performance. Auburn Gear products are proudly made in the USA!

    Auburn Gear Dana 44

    Auburn Gear

    MSRP: $399.99
    $305.99
    Hook up with Auburn Gear High Performance series differentials and outperform the competition! These differentials deliver superior performance through a unique cone-clutch design that transfers more power to the high-traction wheel for quick...
    MSRP: $399.99
    $305.99
  • On Sale
    Hook up with Auburn Gear High Performance series differentials and outperform the competition! These differentials deliver superior performance through a unique cone-clutch design that transfers more power to the high-traction wheel for quick acceleration and tight cornering. The Auburn High Performance limited-slip series is engineered to provide smooth torque-sensing operation with the correct bias ratios to meet your performance needs--whether they involve daily driving or muddy back roads. Plus, every gear unit is inspected and hand-assembled in America. No matter what you're driving, Auburn Gear High Performance series differentials will maximize your vehicle's traction for optimum performance. Auburn Gear products are proudly made in the USA!

Only one available at this price! Hook up with Auburn Gear High Performance series differentials and outperform the competition! These differentials deliver superior performance through a unique cone-clutch design that transfers more power to the high-traction wheel for quick acceleration and tight cornering. The Auburn High Performance limited-slip series is engineered to provide smooth torque-sensing operation with the correct bias ratios to meet your performance needs--whether they involve daily driving or muddy back roads. Plus, every gear unit is inspected and hand-assembled in America. No matter what you're driving, Auburn Gear High Performance series differentials will maximize your vehicle's traction for optimum performance. Auburn Gear products are proudly made in the USA!

    Auburn Gear Limited Slip Differential | 12-Bolt 8 7/8"

    Auburn Gear

    MSRP: $484.28
    Now: $424.99
    Was: $425.00
    Hook up with Auburn Gear High Performance series differentials and outperform the competition! These differentials deliver superior performance through a unique cone-clutch design that transfers more power to the high-traction wheel for quick...
    MSRP: $484.28
    Now: $424.99
    Was: $425.00
    Quick view
  • Hook up with Auburn Gear High Performance series differentials and outperform the competition! These differentials deliver superior performance through a unique cone-clutch design that transfers more power to the high-traction wheel for quick acceleration and tight cornering. The Auburn High Performance limited-slip series is engineered to provide smooth torque-sensing operation with the correct bias ratios to meet your performance needs--whether they involve daily driving or muddy back roads. Plus, every gear unit is inspected and hand-assembled in America. No matter what you're driving, Auburn Gear High Performance series differentials will maximize your vehicle's traction for optimum performance. Auburn Gear products are proudly made in the USA!

    Auburn Gear | Ford 8.8" 10 Bolt LSD

    Auburn Gear

    MSRP: $599.99
    $444.99
    Hook up with Auburn Gear High Performance series differentials and outperform the competition! These differentials deliver superior performance through a unique cone-clutch design that transfers more power to the high-traction wheel for quick...
    MSRP: $599.99
    $444.99
  • These Chevrolet Performance automatic transmission controllers include the wiring harness, controller, software, and laptop hookup. They are designed to allow for the use of electronically controlled transmissions in early model vehicles. Chevrolet Performance automatic transmission controllers are fully programmable for upshift, downshift, part throttle and wide-open shifts, and shift firmness. They come preprogrammed--just enter your rear tire diameter and rear axle ratio and go, or create your own custom shift characteristics. Chevrolet Performance automatic transmission controllers were originally developed by GM Racing for off-road truck racing. They have the ability to record and graph drag racing data like time, speed, shift point, engine rpm, and more.

    Automatic Transmission Controller

    Chevrolet Performance

    MSRP: $1,599.99
    $1,399.99
    These Chevrolet Performance automatic transmission controllers include the wiring harness, controller, software, and laptop hookup. They are designed to allow for the use of electronically controlled transmissions in early model vehicles. Chevrolet...
    MSRP: $1,599.99
    $1,399.99
  • ACC Performance Products Plus Boss Hog Night Stalker Series torque converters can take you from towing to rock crawling. Night Stalker converters are obtainable in four levels to perfect your performance needs, and they are designed to handle as much as 500 horsepower. These Boss Hog torque converters use Torrington-style incased bearings throughout, and ACC Performance four-corner tack welds the turbine and impeller fins to maintain strength and quality. For stock to mildly modified vehicles, ACC Performance Boss Hog Night Stalker Series torque converters offer performance that is tough and reliable.

    Boss Hog Night Crawler Converter | 4L60E

    ACC Performance

    MSRP: $499.99
    $449.99
    ACC Performance Products Plus Boss Hog Night Stalker Series torque converters can take you from towing to rock crawling. Night Stalker converters are obtainable in four levels to perfect your performance needs, and they are designed to handle as much as...
    MSRP: $499.99
    $449.99