Site Information

shop by Category

CONNECT WITH US

 Loading... Please wait...
  • These are not your average swap headers. These headers offer many feature that are normally only on custom race headers. We start with 3/8" laser cut flanges with the tubes welded inside and out and then machined. The long tube headers feature bolt-on race inspired collectors for ease of installation and tuning of primary length. The mid-lengths use a gasket-less ball and socket type collector for a leak free install. They're ceramic coated inside and out to fight performance robbing underhood temperatures then polished for a long lasting show quality finish.

We offer several sizes of headers so you can match them to your engine combination. Our 1 3/4” mid-length headers offer great ground clearance and support up to 400hp. Our 1 ¾” long-tubes will support up to 600hp. For more than 600hp we offer 1 7/8” long-tubes and for big cubic inch monster engines our 2" is a perfect match. Our stepped headers offer great high rpm performance while retaining good low and mid-range power. They all include gaskets, bolts, reducers, and O2 sensor bungs.

There are upgrade options above - if you want more, we can definitely give it to you! These work perfect with our motor mount and transmission crossmember kits.
  • These are not your average swap headers. These headers offer many feature that are normally only on custom race headers. We start with 3/8" laser cut flanges with the tubes welded inside and out and then machined. The long tube headers feature bolt-on race inspired collectors for ease of installation and tuning of primary length. The mid-lengths use a gasket-less ball and socket type collector for a leak free install. They're ceramic coated inside and out to fight performance robbing underhood temperatures then polished for a long lasting show quality finish.

We offer several sizes of headers so you can match them to your engine combination. Our 1 3/4” mid-length headers offer great ground clearance and support up to 400hp. Our 1 ¾” long-tubes will support up to 600hp. For more than 600hp we offer 1 7/8” long-tubes and for big cubic inch monster engines our 2" is a perfect match. Our stepped headers offer great high rpm performance while retaining good low and mid-range power. They all include gaskets, bolts, reducers, and O2 sensor bungs.

There are upgrade options above - if you want more, we can definitely give it to you! These work perfect with our motor mount and transmission crossmember kits.
  • These are not your average swap headers. These headers offer many feature that are normally only on custom race headers. We start with 3/8" laser cut flanges with the tubes welded inside and out and then machined. The long tube headers feature bolt-on race inspired collectors for ease of installation and tuning of primary length. The mid-lengths use a gasket-less ball and socket type collector for a leak free install. They're ceramic coated inside and out to fight performance robbing underhood temperatures then polished for a long lasting show quality finish.

We offer several sizes of headers so you can match them to your engine combination. Our 1 3/4” mid-length headers offer great ground clearance and support up to 400hp. Our 1 ¾” long-tubes will support up to 600hp. For more than 600hp we offer 1 7/8” long-tubes and for big cubic inch monster engines our 2" is a perfect match. Our stepped headers offer great high rpm performance while retaining good low and mid-range power. They all include gaskets, bolts, reducers, and O2 sensor bungs.

There are upgrade options above - if you want more, we can definitely give it to you! These work perfect with our motor mount and transmission crossmember kits.
  • We offer several sizes of headers so you can match them to your engine combination. Our 1 5/8” mid-length headers offer great ground clearance and support up to 400hp. Our 1 ¾” long-tubes will support up to 600hp. For more than 600hp we offer 1 7/8” long-tubes and for big cubic inch monster engines our 2" is a perfect match. Our stepped headers offer great high rpm performance while retaining good low and mid-range power. They all include gaskets, bolts, reducers, and O2 sensor bungs. Click for more info

Corvette LS Swap Headers| 63-82

$999.99 $599.99
(You save $400.00)
SKU:
LSXE.6382VETTE.0923HDR
Gift Wrapping:
Options available
Quantity:

Product Description

These are not your average swap headers. These headers offer many feature that are normally only on custom race headers. We start with 3/8" laser cut flanges with the tubes welded inside and out and then machined. The long tube headers feature bolt-on race inspired collectors for ease of installation and tuning of primary length. The mid-lengths use a gasket-less ball and socket type collector for a leak free install. They're ceramic coated inside and out to fight performance robbing underhood temperatures then polished for a long lasting show quality finish.

We offer several sizes of headers so you can match them to your engine combination. Our 1 3/4” mid-length headers offer great ground clearance and support up to 400hp. Our 1 ¾” long-tubes will support up to 600hp. For more than 600hp we offer 1 7/8” long-tubes and for big cubic inch monster engines our 2" is a perfect match. Our stepped headers offer great high rpm performance while retaining good low and mid-range power. They all include gaskets, bolts, reducers, and O2 sensor bungs.

There are upgrade options above - if you want more, we can definitely give it to you! These work perfect with our motor mount and transmission crossmember kits.

mid-lengthsm.jpg s-10-long-tube-header.jpgsteppedsm-header.jpg

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

Find Similar Products by Category