1963-1967 Swap Kits

1963-1967 Swap Kits

1963-1967 Corvette LS Conversion Kit

Image result for c2 corvette

This swap kit is for the 1963-1967 Corvette. It was designed around our 4th gen f-body and Moroso oil pans. It bolts into existing holes in the frame and was designed to give you the most options for front accessory drives. Unlike others, our kit positions the engine so there is no steering interference and maintains the proper drive-line angle for smooth highway cruising. It provides clearance for the factory AC box, power brake booster, and aftermarket suspension components.  We offer a complete line of headers that give unparalleled performance and ground clearance with sizes that are matched to your engine combo. These combined parts offer an easy, strong, and clean installation of your LS engine.

  • Edelbrock E-Force universal supercharger systems have been designed for engine swaps into street rods and musclecars. They feature 12 in. long runners for maximum low-end torque and great drivability. They are capable of an incredible 600+ flywheel horsepower and 550+ lbs.-ft. of torque. If you're looking for a supercharger system for your hot rod that's designed to provide instantly reliable horsepower with low boost for minimum stress on your engine, look no further than Edelbrock E-Force universal supercharger systems--they're exactly what you need for your engine swap project. 

Edelbrock E-Force universal supercharger systems include the following components:

* Supercharger manifold assembly
* Cast aluminum tensioner/idler bracket
* Cast aluminum engine valley tray
* Heavy-duty automatic belt tensioner
* Dual, high-capacity, bar and plate, intercoolers
* High-flow 95mm mass airflow sensor housing 
* Extruded aluminum fuel rails with -6 AN lines
* Custom-molded intercooler hoses with quick-connect fittings
* Electric intercooler water pump
* Intercooler recovery tank
* Fuel injectors
* Steel idler pulleys with heavy-duty, high-speed bearings
* High-flow conical air filter
* Edelbrock aluminum engine covers
* Plug and play, electrical harness, installation hardware
* 3.5 in. supercharger pulley

    Gen IV Universal Supercharger Kit | LS2

    Edelbrock

    MSRP: $6,999.99
    $5,899.99
    Edelbrock E-Force universal supercharger systems have been designed for engine swaps into street rods and musclecars. They feature 12 in. long runners for maximum low-end torque and great drivability. They are capable of an incredible 600+ flywheel...
    MSRP: $6,999.99
    $5,899.99
  • Corvette Tank Time!

These conversion fuel tanks solve the problem of supplying your new LS engine with a steady flow of fuel. The tanks, made specifically for your car, feature a recessed area in the top for the fuel pump module and sending unit, so no modifications are needed for clearance. They have an innovative baffling system inside to control fuel slosh and keep the pump fed even at low fuel levels and extreme driving conditions. They are galvanized steel and powder coated silver for maximum durability. The kit includes a fuel sending unit designed to work with your factory style fuel gauge. The included fuel pump module features an in-tank wiring harness and three ports - one for the feed line, one for the return line, and one for the vent. The kit has two available Walbro fuel pump options. The standard 255 LPH pump or the 400 LPH pump for supercharged or 550+hp applications.
The kit also includes tank straps, vent filter, gaskets, and hardware. They look like original equipment from under the car and are absolutely the best way to go when converting to EFI. Fits 63-67 Corvette

    63-67 Corvette Fuel Tank

    Walbro

    MSRP: $999.99
    $669.99
    Corvette Tank Time! These conversion fuel tanks solve the problem of supplying your new LS engine with a steady flow of fuel. The tanks, made specifically for your car, feature a recessed area in the top for the fuel pump module and sending unit, so no...
    MSRP: $999.99
    $669.99
  • Exhaust Cutouts

    Quick Time Performance

    MSRP: $499.99
    $399.99
    With Quick Time electric cutouts, you can have the best of both worlds--they're quiet for the street and wide-open for the strip. These electrically controlled exhaust valves bolt to standard cutouts and can be opened and closed from inside of the car...
    MSRP: $499.99
    $399.99
  • Edelbrock E-Force universal supercharger systems have been designed for engine swaps into street rods and musclecars. They feature 12 in. long runners for maximum low-end torque and great drivability. They are capable of an incredible 600+ flywheel horsepower and 550+ lbs.-ft. of torque. If you're looking for a supercharger system for your hot rod that's designed to provide instantly reliable horsepower with low boost for minimum stress on your engine, look no further than Edelbrock E-Force universal supercharger systems--they're exactly what you need for your engine swap project. 

Edelbrock E-Force universal supercharger systems include the following components:

* Supercharger manifold assembly
* Cast aluminum tensioner/idler bracket
* Cast aluminum engine valley tray
* Heavy-duty automatic belt tensioner
* Dual, high-capacity, bar and plate, intercoolers
* High-flow 95mm mass airflow sensor housing 
* Extruded aluminum fuel rails with -6 AN lines
* Custom-molded intercooler hoses with quick-connect fittings
* Electric intercooler water pump
* Intercooler recovery tank
* Fuel injectors
* Steel idler pulleys with heavy-duty, high-speed bearings
* High-flow conical air filter
* Edelbrock aluminum engine covers
* Plug and play, electrical harness, installation hardware
* 3.5 in. supercharger pulley

    Gen III Universal Supercharger Kit | LS1/LS6

    Edelbrock

    MSRP: $7,799.99
    $6,899.99
    Edelbrock E-Force universal supercharger systems have been designed for engine swaps into street rods and musclecars. They feature 12 in. long runners for maximum low-end torque and great drivability. They are capable of an incredible 600+ flywheel...
    MSRP: $7,799.99
    $6,899.99
  • Edelbrock E-Force universal supercharger systems have been designed for engine swaps into street rods and musclecars. They feature 12 in. long runners for maximum low-end torque and great drivability. They are capable of an incredible 600+ flywheel horsepower and 550+ lbs.-ft. of torque. If you're looking for a supercharger system for your hot rod that's designed to provide instantly reliable horsepower with low boost for minimum stress on your engine, look no further than Edelbrock E-Force universal supercharger systems--they're exactly what you need for your engine swap project. 

Edelbrock E-Force universal supercharger systems include the following components:

* Supercharger manifold assembly
* Cast aluminum tensioner/idler bracket
* Cast aluminum engine valley tray
* Heavy-duty automatic belt tensioner
* Dual, high-capacity, bar and plate, intercoolers
* High-flow 95mm mass airflow sensor housing 
* Extruded aluminum fuel rails with -6 AN lines
* Custom-molded intercooler hoses with quick-connect fittings
* Electric intercooler water pump
* Intercooler recovery tank
* Fuel injectors
* Steel idler pulleys with heavy-duty, high-speed bearings
* High-flow conical air filter
* Edelbrock aluminum engine covers
* Plug and play, electrical harness, installation hardware
* 3.5 in. supercharger pulley

    Gen IV Universal Supercharger Kit | LS3/L92V

    Edelbrock

    MSRP: $7,499.99
    $6,299.99
    Edelbrock E-Force universal supercharger systems have been designed for engine swaps into street rods and musclecars. They feature 12 in. long runners for maximum low-end torque and great drivability. They are capable of an incredible 600+ flywheel...
    MSRP: $7,499.99
    $6,299.99
  • Hello LSx Guys! Get your Vette on the road daily - get your project on the road with this swap kit!

This swap kit is for the 1963-1967 Corvette. It was designed around our 4th gen f-body and CTS-V oil pans. It bolts into existing holes in the frame and was designed to give you the most options for front accessory drives. Unlike others, our kit positions the engine so there is no steering interference and maintains the proper drive-line angle for smooth highway cruising. It provides clearance for the factory AC box, power brake booster, and aftermarket suspension components.  We offer a complete line of Muscle Rods headers that give unparalleled performance and ground clearance with sizes that are matched to your engine combo. These combined parts offer an easy, strong, and clean installation of your LS engine.

Can work with the following transmissions:

LS and T-56 or TR-6060
LS and 4L60E to 4L70E
Please advise in the notes on which combo you will be installing in your project. F-Body or CTS-V Pan included. Please specify which one you prefer

    LS Swap Kit for Corvette | 63-67

    LSxEverything

    MSRP: $1,799.99
    $999.99
    Hello LSx Guys! Get your Vette on the road daily - get your project on the road with this swap kit! This swap kit is for the 1963-1967 Corvette. It was designed around our 4th gen f-body and CTS-V oil pans. It bolts into existing holes in the frame...
    MSRP: $1,799.99
    $999.99
  • On Sale
    These Quick Time Performance oval electric cutouts feature a new low-profile design for any car or truck that has limited ground clearance. They provide the best of both worlds! They're quiet for the street and wide-open for the strip. Go from stealth quiet to wide-open power and experience the gains, even if you're already enjoying an aftermarket exhaust system. You control the volume and the power. You can open your exhaust with the flip of a switch or you can run it closed, all the way open, or at any position in between.

The Quick Time Performance oval electric cutouts also feature: 

* CNC-machined 6061 aircraft aluminum body
* Stainless steel butterfly plate and shaft
* 6061 aircraft aluminum motor plate
* High-torque DC gear-driven motor
* toggle switch
* Weatherproof connectors with gold plated contacts
Tubing Diameter (in): 3.000 in.
Exhaust Cutout Style: Electric
Exhaust Cutout Material: Aluminum
Exhaust Cutout Finish: Natural
Exhaust Cutout Installation: Bolt-on
Quantity: Sold as a pair.
Notes: Dual oval valve, will fit 2.500 in. to 3.000 in. diameter exhaust pipes. Designed to be welded directly into exhaust pipes; fabrication and welding required. Bolt pattern measures 3.875. x 2.750 in.

    Oval Exhaust Cutouts

    Quick Time Performance

    MSRP: $599.99
    Now: $479.99
    Was: $489.99
    These Quick Time Performance oval electric cutouts feature a new low-profile design for any car or truck that has limited ground clearance. They provide the best of both worlds! They're quiet for the street and wide-open for the strip. Go from stealth...
    MSRP: $599.99
    Now: $479.99
    Was: $489.99
  • On Sale
    Non GTO High Clearance Pan. No remote filter required. The kit includes pickup tube, gasket, hardware, and pickup tube girdle The conversion kit was designed around the 2004-06 GTO oil pan. These are no longer available from GM, so we offer this Moroso 6 1/2 quart pan. The kit includes pickup tube, gasket, hardware, and pickup tube girdle. Remote oil filter is required.

    Performance Pan | GTO/F-Body

    Moroso

    MSRP: $599.00
    Now: $479.99
    Was: $699.99
    The conversion kit was designed around the 2004-06 GTO oil pan. These are no longer available from GM, so we offer this Moroso 6 1/2 quart pan. The kit includes pickup tube, gasket, hardware, and pickup tube girdle. Remote oil filter is required...
    MSRP: $599.00
    Now: $479.99
    Was: $699.99