1968-1982 Swap Kits

1968-1982 Swap Kits

1968-1982 Corvette LS Conversion Kit

This swap kit is for the 1968-1982 Corvette. It was designed around our 4th gen f-body and CTS-V oil pans. It bolts into existing holes in the frame and was designed to give you the most options for front accessory drives. Unlike others, our kit positions the engine so there is no steering interference and maintains the proper drive-line angle for smooth highway cruising.

  • Edelbrock E-Force universal supercharger systems have been designed for engine swaps into street rods and musclecars. They feature 12 in. long runners for maximum low-end torque and great drivability. They are capable of an incredible 600+ flywheel horsepower and 550+ lbs.-ft. of torque. If you're looking for a supercharger system for your hot rod that's designed to provide instantly reliable horsepower with low boost for minimum stress on your engine, look no further than Edelbrock E-Force universal supercharger systems--they're exactly what you need for your engine swap project. 

Edelbrock E-Force universal supercharger systems include the following components:

* Supercharger manifold assembly
* Cast aluminum tensioner/idler bracket
* Cast aluminum engine valley tray
* Heavy-duty automatic belt tensioner
* Dual, high-capacity, bar and plate, intercoolers
* High-flow 95mm mass airflow sensor housing 
* Extruded aluminum fuel rails with -6 AN lines
* Custom-molded intercooler hoses with quick-connect fittings
* Electric intercooler water pump
* Intercooler recovery tank
* Fuel injectors
* Steel idler pulleys with heavy-duty, high-speed bearings
* High-flow conical air filter
* Edelbrock aluminum engine covers
* Plug and play, electrical harness, installation hardware
* 3.5 in. supercharger pulley

    Gen IV Universal Supercharger Kit | LS2

    Edelbrock

    MSRP: $6,999.99
    $5,899.99
    Edelbrock E-Force universal supercharger systems have been designed for engine swaps into street rods and musclecars. They feature 12 in. long runners for maximum low-end torque and great drivability. They are capable of an incredible 600+ flywheel...
    MSRP: $6,999.99
    $5,899.99
  • Do you want cooling improvement and performance? During a test, a Be Cool aluminum radiator was installed in a 1955 Chevy in about an hour and lowered its operating temperature from 220 degrees to 180 degrees F--even with the air conditioning going full-blast. Be Cool custom-fit aluminum radiators are designed to be a direct fit, and they feature 15 percent more cooling capacity than factory 4-core models. What's more, they can be used with all brands of antifreeze and are available in both standard and polished finishes.

    63-72 Corvette Aluminum Radiator

    Be Cool

    MSRP: $899.99
    $829.99
    Do you want cooling improvement and performance? During a test, a Be Cool aluminum radiator was installed in a 1955 Chevy in about an hour and lowered its operating temperature from 220 degrees to 180 degrees F--even with the air conditioning going...
    MSRP: $899.99
    $829.99
  • 68-79 Corvette Fuel Tank

    Walbro

    MSRP: $899.99
    $729.99
    Corvette Tank Time! These conversion fuel tanks solve the problem of supplying your new LS engine with a steady flow of fuel. The tanks, made specifically for your car, feature a recessed area in the top for the fuel pump module and sending unit, so no...
    MSRP: $899.99
    $729.99
  • Engine and Transmission Mount Kit
Includes motor mounts, frame brackets, transmission crossmember, transmission mount, and hardware.  Manufactured from the highest grade American made steel. They're laser cut, precision bent, powder coated and feature polyurethane bushings.  Comes with a lifetime free replacement warranty on the bushings.

    68-82 Corvette Motor & Trans Mount

    LSxEverything

    $529.99
    Engine and Transmission Mount Kit Includes motor mounts, frame brackets, transmission crossmember, transmission mount, and hardware.  Manufactured from the highest grade American made steel. They're laser cut, precision bent, powder coated and...
    $529.99
  • F-body Oil Pan
The f-body oil pan gives a little more ground clearance but does not clear the factory power assist slave cylinder. The CTS-V pan is needed if running factory style power steering. Includes windage tray, pickup tube, hardware, gasket, and dipstick.

    68-82 Corvette Oil Pan

    $399.99
    F-body Oil Pan The f-body oil pan gives a little more ground clearance but does not clear the factory power assist slave cylinger. The CTS-V pan is needed if running factory style power steering. Includes windage tray, pickup tube, hardware, gasket, and...
    $399.99
  • e now offer conversion radiators specifically designed for your car with an LS engine. They feature all aluminum construction, but unlike others on the market, they have beautifully stamped tanks with strengthening indentations just like your original. They're a double pass design putting the inlet and outlet on the same side which greatly simplifies plumbing to the engine. The all important steam port bung is welded into the upper part of the tank which lets your new LS engine vent properly. They also include a coolant temp fan switch in the tank. Excellent restoration type quality made in the USA. Available in bare aluminum or black and with or without high performance electric fans installed.

    73-76 Corvette Radiator | with fans

    Griffin

    MSRP: $1,299.99
    $999.99
    We now offer conversion radiators specifically designed for your car with an LS engine. They feature all aluminum construction, but unlike others on the market, they have beautifully stamped tanks with strengthening indentations just like your original...
    MSRP: $1,299.99
    $999.99
  • e now offer conversion radiators specifically designed for your car with an LS engine. They feature all aluminum construction, but unlike others on the market, they have beautifully stamped tanks with strengthening indentations just like your original. They're a double pass design putting the inlet and outlet on the same side which greatly simplifies plumbing to the engine. The all important steam port bung is welded into the upper part of the tank which lets your new LS engine vent properly. They also include a coolant temp fan switch in the tank. Excellent restoration type quality made in the USA. A show piece under the hood of your Corvette, that actually keeps the temps where they need to be!

    77-81 Corvette Radiator | with fans

    Griffin

    MSRP: $1,299.99
    $999.99
    We now offer conversion radiators specifically designed for your car with an LS engine. They feature all aluminum construction, but unlike others on the market, they have beautifully stamped tanks with strengthening indentations just like your original...
    MSRP: $1,299.99
    $999.99
  • Harness Includes Circuits For:
A/C & Heat
Accessory / Cigarette Lighter
Backup Lights
Brake Lights
Charging
Dome Light
Electric Choke
Emergency Flashers
Fan Relay Activation Power
Fused Power Source
Headlights
Horn (Relay)
Ignition Coil
Instrument Panel Lighting and Gauges*
Park Lights
Radio/Clock (Constant and Switched)
Starting
Tail Lights
Third Brake Light
Turn Signals
Wipers
*Includes Wires For:
Fuel Gauge
Oil Gauge
Tachometer
Temperature Gauge
Voltmeter
Connectors Included:
GM Steering Column Turn Switch and Ignition Switch
Dimmer Switch
(2) Headlight Pigtails
10SI & 12 SI Alternator
HEI Power and Tach and (20) Extra 56 Series Terminals for use with any Factory GM 56 Series Connector such as Headlight Switch, Wiper Switch or A/C Switch/Blower Motor
Specifications:

Type
21 Circuit
Circuit Quantity
21
Fuse Block Included
Yes
Fuse Block Location
Front
Fuse Style
ATO/ATC
Ignition Key Location
Column
Quantity
Sold as a kit
Harness Length
Extra-long

Harness Includes Circuits For:
A/C & Heat
Accessory / Cigarette Lighter
Backup Lights
Brake Lights
Charging
Dome Light
Electric Choke
Emergency Flashers
Fan Relay Activation Power
Fused Power Source
Headlights
Horn (Relay)
Ignition Coil
Instrument Panel Lighting and Gauges*
Park Lights
Radio/Clock (Constant and Switched)
Starting
Tail Lights
Third Brake Light
Turn Signals
Wipers
*Includes Wires For:
Fuel Gauge
Oil Gauge
Tachometer
Temperature Gauge
Voltmeter
Connectors Included:
GM Steering Column Turn Switch and Ignition Switch
Dimmer Switch
(2) Headlight Pigtails
10SI & 12 SI Alternator
HEI Power and Tach and (20) Extra 56 Series Terminals for use with any Factory GM 56 Series Connector such as Headlight Switch, Wiper Switch or A/C Switch/Blower Motor
Specifications:

Type
21 Circuit
Circuit Quantity
21
Fuse Block Included
Yes
Fuse Block Location
Front
Fuse Style
ATO/ATC
Ignition Key Location
Column
Quantity
Sold as a kit
Harness Length
Extra-long

    Classic Chassis Harness | 21 Circuit

    Painless Performance

    MSRP: $699.99
    $499.99
    Customizable The Highest Quality Wire You Can Buy:Painless uses high-temperature, abrasion-resistant TXL wire which has twice the voltage rating of standard, general purpose wire. It withstands up to 275° and does not kink. Compact,...
    MSRP: $699.99
    $499.99
  • Exhaust Cutouts

    Quick Time Performance

    MSRP: $499.99
    $399.99
    With Quick Time electric cutouts, you can have the best of both worlds--they're quiet for the street and wide-open for the strip. These electrically controlled exhaust valves bolt to standard cutouts and can be opened and closed from inside of the car...
    MSRP: $499.99
    $399.99
  • Edelbrock E-Force universal supercharger systems have been designed for engine swaps into street rods and musclecars. They feature 12 in. long runners for maximum low-end torque and great drivability. They are capable of an incredible 600+ flywheel horsepower and 550+ lbs.-ft. of torque. If you're looking for a supercharger system for your hot rod that's designed to provide instantly reliable horsepower with low boost for minimum stress on your engine, look no further than Edelbrock E-Force universal supercharger systems--they're exactly what you need for your engine swap project. 

Edelbrock E-Force universal supercharger systems include the following components:

* Supercharger manifold assembly
* Cast aluminum tensioner/idler bracket
* Cast aluminum engine valley tray
* Heavy-duty automatic belt tensioner
* Dual, high-capacity, bar and plate, intercoolers
* High-flow 95mm mass airflow sensor housing 
* Extruded aluminum fuel rails with -6 AN lines
* Custom-molded intercooler hoses with quick-connect fittings
* Electric intercooler water pump
* Intercooler recovery tank
* Fuel injectors
* Steel idler pulleys with heavy-duty, high-speed bearings
* High-flow conical air filter
* Edelbrock aluminum engine covers
* Plug and play, electrical harness, installation hardware
* 3.5 in. supercharger pulley

    Gen III Universal Supercharger Kit | LS1/LS6

    Edelbrock

    MSRP: $7,799.99
    $6,899.99
    Edelbrock E-Force universal supercharger systems have been designed for engine swaps into street rods and musclecars. They feature 12 in. long runners for maximum low-end torque and great drivability. They are capable of an incredible 600+ flywheel...
    MSRP: $7,799.99
    $6,899.99
  • Edelbrock E-Force universal supercharger systems have been designed for engine swaps into street rods and musclecars. They feature 12 in. long runners for maximum low-end torque and great drivability. They are capable of an incredible 600+ flywheel horsepower and 550+ lbs.-ft. of torque. If you're looking for a supercharger system for your hot rod that's designed to provide instantly reliable horsepower with low boost for minimum stress on your engine, look no further than Edelbrock E-Force universal supercharger systems--they're exactly what you need for your engine swap project. 

Edelbrock E-Force universal supercharger systems include the following components:

* Supercharger manifold assembly
* Cast aluminum tensioner/idler bracket
* Cast aluminum engine valley tray
* Heavy-duty automatic belt tensioner
* Dual, high-capacity, bar and plate, intercoolers
* High-flow 95mm mass airflow sensor housing 
* Extruded aluminum fuel rails with -6 AN lines
* Custom-molded intercooler hoses with quick-connect fittings
* Electric intercooler water pump
* Intercooler recovery tank
* Fuel injectors
* Steel idler pulleys with heavy-duty, high-speed bearings
* High-flow conical air filter
* Edelbrock aluminum engine covers
* Plug and play, electrical harness, installation hardware
* 3.5 in. supercharger pulley

    Gen IV Universal Supercharger Kit | LS3/L92V

    Edelbrock

    MSRP: $7,499.99
    $6,299.99
    Edelbrock E-Force universal supercharger systems have been designed for engine swaps into street rods and musclecars. They feature 12 in. long runners for maximum low-end torque and great drivability. They are capable of an incredible 600+ flywheel...
    MSRP: $7,499.99
    $6,299.99
  • Hello LSx Guys! Get your Vette on the road daily - get your project on the road with this swap kit!

This swap kit is for the 1968-1982 Corvette. It was designed around our 4th gen f-body and CTS-V oil pans. It bolts into existing holes in the frame and was designed to give you the most options for front accessory drives. Unlike others, our kit positions the engine so there is no steering interference and maintains the proper drive-line angle for smooth highway cruising. It provides clearance for the factory AC box, power brake booster, and aftermarket suspension components.  We offer a complete line of Muscle Rods headers that give unparalleled performance and ground clearance with sizes that are matched to your engine combo. These combined parts offer an easy, strong, and clean installation of your LS engine.

Can work with the following transmissions:

LS and T-56 or TR-6060
LS and 4L60E to 4L70E
Please advise in the notes on which combo you will be installing in your project. F-Body or CTS-V Pan included. Please specify which one you prefer

    LS Swap Kit for Corvette | 68-82

    LSxEverything

    $1,999.99
    Hello LSx Guys! Get your Vette on the road daily - get your project on the road with this swap kit! This swap kit is for the 1968-1982 Corvette. It was designed around our 4th gen f-body and Moroso oil pans. It bolts into existing holes in the frame and...
    $1,999.99