Tri-5 LSx/LTx Swaps

Tri-5 LSx/LTx Swaps

Our GM Tri-5 kits include: 1955-57 Bel Air, Biscayne, 150,210, and Delray in 2 door, 4 door and Convertible.

Image result for bagged nomad

  • Edelbrock E-Force universal supercharger systems have been designed for engine swaps into street rods and musclecars. They feature 12 in. long runners for maximum low-end torque and great drivability. They are capable of an incredible 600+ flywheel horsepower and 550+ lbs.-ft. of torque. If you're looking for a supercharger system for your hot rod that's designed to provide instantly reliable horsepower with low boost for minimum stress on your engine, look no further than Edelbrock E-Force universal supercharger systems--they're exactly what you need for your engine swap project. 

Edelbrock E-Force universal supercharger systems include the following components:

* Supercharger manifold assembly
* Cast aluminum tensioner/idler bracket
* Cast aluminum engine valley tray
* Heavy-duty automatic belt tensioner
* Dual, high-capacity, bar and plate, intercoolers
* High-flow 95mm mass airflow sensor housing 
* Extruded aluminum fuel rails with -6 AN lines
* Custom-molded intercooler hoses with quick-connect fittings
* Electric intercooler water pump
* Intercooler recovery tank
* Fuel injectors
* Steel idler pulleys with heavy-duty, high-speed bearings
* High-flow conical air filter
* Edelbrock aluminum engine covers
* Plug and play, electrical harness, installation hardware
* 3.5 in. supercharger pulley

    Gen IV Universal Supercharger Kit | LS2

    Edelbrock

    MSRP: $6,999.99
    $5,899.99
    Edelbrock E-Force universal supercharger systems have been designed for engine swaps into street rods and musclecars. They feature 12 in. long runners for maximum low-end torque and great drivability. They are capable of an incredible 600+ flywheel...
    MSRP: $6,999.99
    $5,899.99
  • On Sale
    Baer Brakes Baer Claw Pro+ disc brake systems are built to please the most demanding users. They include Baer 6P compact 6-piston calipers machined from 2618 forgings, resulting in the stiffest possible design, even at extreme operating temperatures. They use radial mounting configurations to disperse loads evenly, and internal fluid transfer tube passages for an ultra-clean look. Baer Brakes Baer Claw Pro+ disc brake systems include brake rotors with zinc coated surfaces and a matched set of brake pads. The unique 2-piece rotors use an aluminum hat to reduce overall weight, allow for differential expansion of the rotor plates, and lower thermal transfer to the hub.

    14" 6-Piston Caliper Brake Kit

    Baer

    MSRP: $2,999.99
    Now: $2,149.99
    Was: $2,249.99
    Baer Brakes Baer Claw Pro+ disc brake systems are built to please the most demanding users. They include Baer 6P compact 6-piston calipers machined from 2618 forgings, resulting in the stiffest possible design, even at extreme operating temperatures...
    MSRP: $2,999.99
    Now: $2,149.99
    Was: $2,249.99
  • Free Shipping in the United States!
Send a mixture of nitrous and essential enriching fuel into the intake runner and allow you to select boost. Kit includes the (empty) bottle, solenoids, switches, fittings, stainless braided hose, and all hardware needed for installation.

    40-100 HP Nitrous System

    Edelbrock

    MSRP: $1,299.99
    $999.99
    Edelbrock EFI nitrous systems give you large, adjustable horsepower gains in your choice of wet or dry approaches. Wet systems send a mixture of nitrous and essential enriching fuel into the intake runner and allow you to select boost from 50 to 70 hp...
    MSRP: $1,299.99
    $999.99
  • This swap kit is for the 1955-57 Chevy. This kit includes the following:

Mount and Crossmember Kit

Includes motor mounts, frame brackets, transmission crossmember, transmission mount, and hardware.  Manufactured from the highest grade American made steel. They're laser cut, precision bent, powder coated and feature polyurethane bushings.  Comes with a lifetime free replacement warranty on the bushings.

    55-57 GM Tri-5 | LS Swap Kit

    LSxEverything

    MSRP: $769.99
    $639.99
    This swap kit is for the 1955-57 Chevy. This kit includes the following: Mount and Crossmember Kit Includes motor mounts, frame brackets, transmission crossmember, transmission mount, and hardware.  Manufactured from the highest grade...
    MSRP: $769.99
    $639.99
  • Aren't you ready to harness that new LTx technology? Well you know that we are , hence the reason we created these kits...LTx Power for the win! Let's get your Tri-5 going with the newest and latest!

These engine kits have been designed for the new LT Series of engines that GM has been producing since 2014. They work with the LT1 and  LT4 6.2 liter Corvette and crate engines as well as the L83 5.3 and L86 6.2 truck engines. 

These kits position the engine so there is no steering interference, and have crossmembers that support all late model transmissions while maintaining proper drive-line angles. They provide clearance for the factory AC box, power brake booster, and aftermarket suspension components. They are a bolt-in design with frame brackets that replace the originals and include polyurethane bushings that have a lifetime warranty.

This LT swap kit is for 1955-1957 Bel Air, Biscayne, 150, 210 and Delray. It is designed around our new fabricated aluminum oil pan and our 1 7/8" long-tube Stainless headers



Aren't you ready to harness that new LTx technology? Well you know that we are , hence the reason we created these kits...LTx Power for the win! Let's get your Tri-5 going with the newest and latest!

These engine kits have been designed for the new LT Series of engines that GM has been producing since 2014. They work with the LT1 and  LT4 6.2 liter Corvette and crate engines as well as the L83 5.3 and L86 6.2 truck engines. 

These kits position the engine so there is no steering interference, and have crossmembers that support all late model transmissions while maintaining proper drive-line angles. They provide clearance for the factory AC box, power brake booster, and aftermarket suspension components. They are a bolt-in design with frame brackets that replace the originals and include polyurethane bushings that have a lifetime warranty.

This LT swap kit is for 1955-1957 Bel Air, Biscayne, 150, 210 and Delray. It is designed around our new fabricated aluminum oil pan and our 1 7/8" long-tube Stainless headers

    55-57 Tri-5 LTx Swap Kit

    LSxEverything

    MSRP: $2,899.99
    $1,449.99
    Aren't you ready to harness that new LTx technology? Well you know that we are , hence the reason we created these kits...LTx Power for the win! Let's get your Tri-5 going with the newest and latest! These engine kits have been designed for the new LT...
    MSRP: $2,899.99
    $1,449.99
  • Harness Includes Circuits For:
A/C & Heat
Accessory / Cigarette Lighter
Backup Lights
Brake Lights
Charging
Dome Light
Electric Choke
Emergency Flashers
Fan Relay Activation Power
Fused Power Source
Headlights
Horn (Relay)
Ignition Coil
Instrument Panel Lighting and Gauges*
Park Lights
Radio/Clock (Constant and Switched)
Starting
Tail Lights
Third Brake Light
Turn Signals
Wipers
*Includes Wires For:
Fuel Gauge
Oil Gauge
Tachometer
Temperature Gauge
Voltmeter
Connectors Included:
GM Steering Column Turn Switch and Ignition Switch
Dimmer Switch
(2) Headlight Pigtails
10SI & 12 SI Alternator
HEI Power and Tach and (20) Extra 56 Series Terminals for use with any Factory GM 56 Series Connector such as Headlight Switch, Wiper Switch or A/C Switch/Blower Motor
Specifications:

Type
21 Circuit
Circuit Quantity
21
Fuse Block Included
Yes
Fuse Block Location
Front
Fuse Style
ATO/ATC
Ignition Key Location
Column
Quantity
Sold as a kit
Harness Length
Extra-long

Harness Includes Circuits For:
A/C & Heat
Accessory / Cigarette Lighter
Backup Lights
Brake Lights
Charging
Dome Light
Electric Choke
Emergency Flashers
Fan Relay Activation Power
Fused Power Source
Headlights
Horn (Relay)
Ignition Coil
Instrument Panel Lighting and Gauges*
Park Lights
Radio/Clock (Constant and Switched)
Starting
Tail Lights
Third Brake Light
Turn Signals
Wipers
*Includes Wires For:
Fuel Gauge
Oil Gauge
Tachometer
Temperature Gauge
Voltmeter
Connectors Included:
GM Steering Column Turn Switch and Ignition Switch
Dimmer Switch
(2) Headlight Pigtails
10SI & 12 SI Alternator
HEI Power and Tach and (20) Extra 56 Series Terminals for use with any Factory GM 56 Series Connector such as Headlight Switch, Wiper Switch or A/C Switch/Blower Motor
Specifications:

Type
21 Circuit
Circuit Quantity
21
Fuse Block Included
Yes
Fuse Block Location
Front
Fuse Style
ATO/ATC
Ignition Key Location
Column
Quantity
Sold as a kit
Harness Length
Extra-long

    Classic Chassis Harness | 21 Circuit

    Painless Performance

    MSRP: $699.99
    $499.99
    Customizable The Highest Quality Wire You Can Buy:Painless uses high-temperature, abrasion-resistant TXL wire which has twice the voltage rating of standard, general purpose wire. It withstands up to 275° and does not kink. Compact,...
    MSRP: $699.99
    $499.99
  • Kit includes:
-PTFE Hose (no gas smell in your garage)
-Black vinyl coated to protect firewalls and frame mounted lines
-Includes adapters to connect to Aeromotive tank
-Fuel Filter has a built in fuel pressure regulator that maintains a constant 58PSI as needed by all LS engines
-Screw together adapter fittings for the fuel filter, regulator and stock LS fuel rail.
-Proper hose ends that are safe and easy to install on PTFE hose
-Cushioned clamps to mount the fuel hose to your frame

    Complete LS Swap Fuel Kit

    LSxEverything

    MSRP: $649.99
    $499.99
    Everything you need to run your fuel system, minus the fuel pump! Kit includes:-PTFE Hose (no gas smell in your garage)-Black vinyl coated to protect firewalls and frame mounted lines-Includes adapters to connect to Aeromotive tank-Fuel Filter has a...
    MSRP: $649.99
    $499.99
  • We now offer conversion radiators specifically designed for your Tri-5 with an LS engine. They feature all aluminum construction, but unlike others on the market, they have beautifully stamped tanks with strengthening indentations just like your original. The all important steam port bung is welded into the upper part of the tank which lets your new LS engine vent properly. They also include a coolant temp fan switch in the tank as well as a billet radiator cap. Excellent restoration type quality made in the USA. Available in bare aluminum or black and with or without a 16" high performance electric fan installed. The radiators below are in the V8 configuration that mounts to the back of the core support.

    Cooling Fan for Tri-5

    Griffin

    MSRP: $899.99
    $699.99
    We now offer conversion radiators specifically designed for your Tri-5 with an LS engine. They feature all aluminum construction, but unlike others on the market, they have beautifully stamped tanks with strengthening indentations just like your original...
    MSRP: $899.99
    $699.99
  • E-Force Camaro SS Stage 1 Street Legal Supercharger Kit E-Force Camaro SS Stage 1 Street Legal Supercharger Kit

    E-Force Supercharger Kit | 1598

    Edelbrock

    MSRP: $7,999.99
    $6,999.99
    Edelbrock E-Force Camaro SS Stage 1 street legal supercharger kits transform your Camaro into a force to be reckoned with! The kits utilize Eaton's Gen VI TVS supercharger rotors, featuring a four lobe design with a full 160 deg. of twist for maximum...
    MSRP: $7,999.99
    $6,999.99
  • On Sale
    # FF-10  Fuel Filter (10 Micron)
# 640853 (x2)  Quick Disconnect Fittings for Fuel Filter
# 660443 (x2)  1/4" NPT to -6AN Fuel Pump Adapter Fittings
# 624013 (x7)  Russell Straight -6AN Straight Twist-Lok Fittings
# 624163  Russell 90 Degree -6AN Twist-Lok Fitting
# 634173 (25 feet)  Russell -6AN Black Twist-Lok Fuel Hose  
# 174023  EFI Adjustable Bypass Fuel Regulator
# R660293  10 O-Ring Boss Plug
# R670840  6 O-Ring Boss to -6AN Adapter (Regulator Return Fitting)
# R670650 (x2) 10 O-Ring Boss to -6AN Adapter (Regulator Inlet/Outlet Fittings)

EFI Adjustable Bypass Fuel Regulator features - 
Adjustable pressure range of 35-90 PSI
-10 ORB Inlet and Outlet
-6 ORB Return
180 Gallons Per Hour
1/8" NPT Gauge Port
Vacuum Boost Port with 1:1 Boost/Vacuum Rise Ratio
Black Anodized
This billet aluminum fuel pressure regulator is machined from aircraft quality aluminum.  Featuring a fluorosilicone diaphragm designed to withstand high temperature protection and extended life.  Compatible with all grades of gasoline.

    Fuel Swap Kit | Single Tank

    LSxEverything

    MSRP: $649.99
    Now: $399.99
    Was: $499.99
    This fuel line kit includes 25 feet of hose and the fittings that you need to connect your fuel pump to a fuel injected engine.  Regulator is adjustable in pressure from 35-90 PSI.  Perfect for many aftermarket EFI kits with fuel...
    MSRP: $649.99
    Now: $399.99
    Was: $499.99
  • Edelbrock E-Force universal supercharger systems have been designed for engine swaps into street rods and musclecars. They feature 12 in. long runners for maximum low-end torque and great drivability. They are capable of an incredible 600+ flywheel horsepower and 550+ lbs.-ft. of torque. If you're looking for a supercharger system for your hot rod that's designed to provide instantly reliable horsepower with low boost for minimum stress on your engine, look no further than Edelbrock E-Force universal supercharger systems--they're exactly what you need for your engine swap project. 

Edelbrock E-Force universal supercharger systems include the following components:

* Supercharger manifold assembly
* Cast aluminum tensioner/idler bracket
* Cast aluminum engine valley tray
* Heavy-duty automatic belt tensioner
* Dual, high-capacity, bar and plate, intercoolers
* High-flow 95mm mass airflow sensor housing 
* Extruded aluminum fuel rails with -6 AN lines
* Custom-molded intercooler hoses with quick-connect fittings
* Electric intercooler water pump
* Intercooler recovery tank
* Fuel injectors
* Steel idler pulleys with heavy-duty, high-speed bearings
* High-flow conical air filter
* Edelbrock aluminum engine covers
* Plug and play, electrical harness, installation hardware
* 3.5 in. supercharger pulley

    Gen III Universal Supercharger Kit | LS1/LS6

    Edelbrock

    MSRP: $7,799.99
    $6,899.99
    Edelbrock E-Force universal supercharger systems have been designed for engine swaps into street rods and musclecars. They feature 12 in. long runners for maximum low-end torque and great drivability. They are capable of an incredible 600+ flywheel...
    MSRP: $7,799.99
    $6,899.99
  • Edelbrock E-Force universal supercharger systems have been designed for engine swaps into street rods and musclecars. They feature 12 in. long runners for maximum low-end torque and great drivability. They are capable of an incredible 600+ flywheel horsepower and 550+ lbs.-ft. of torque. If you're looking for a supercharger system for your hot rod that's designed to provide instantly reliable horsepower with low boost for minimum stress on your engine, look no further than Edelbrock E-Force universal supercharger systems--they're exactly what you need for your engine swap project. 

Edelbrock E-Force universal supercharger systems include the following components:

* Supercharger manifold assembly
* Cast aluminum tensioner/idler bracket
* Cast aluminum engine valley tray
* Heavy-duty automatic belt tensioner
* Dual, high-capacity, bar and plate, intercoolers
* High-flow 95mm mass airflow sensor housing 
* Extruded aluminum fuel rails with -6 AN lines
* Custom-molded intercooler hoses with quick-connect fittings
* Electric intercooler water pump
* Intercooler recovery tank
* Fuel injectors
* Steel idler pulleys with heavy-duty, high-speed bearings
* High-flow conical air filter
* Edelbrock aluminum engine covers
* Plug and play, electrical harness, installation hardware
* 3.5 in. supercharger pulley

    Gen IV Universal Supercharger Kit | LS3/L92V

    Edelbrock

    MSRP: $7,499.99
    $6,299.99
    Edelbrock E-Force universal supercharger systems have been designed for engine swaps into street rods and musclecars. They feature 12 in. long runners for maximum low-end torque and great drivability. They are capable of an incredible 600+ flywheel...
    MSRP: $7,499.99
    $6,299.99
  • Edelbrock E-Force universal supercharger systems have been designed for engine swaps into street rods and musclecars. They feature 12 in. long runners for maximum low-end torque and great drivability. They are capable of an incredible 600+ flywheel horsepower and 550+ lbs.-ft. of torque. If you're looking for a supercharger system for your hot rod that's designed to provide instantly reliable horsepower with low boost for minimum stress on your engine, look no further than Edelbrock E-Force universal supercharger systems--they're exactly what you need for your engine swap project. 

Edelbrock E-Force universal supercharger systems include the following components:

* Supercharger manifold assembly
* Cast aluminum tensioner/idler bracket
* Cast aluminum engine valley tray
* Heavy-duty automatic belt tensioner
* Dual, high-capacity, bar and plate, intercoolers
* High-flow 95mm mass airflow sensor housing 
* Extruded aluminum fuel rails with -6 AN lines
* Custom-molded intercooler hoses with quick-connect fittings
* Electric intercooler water pump
* Intercooler recovery tank
* Fuel injectors
* Steel idler pulleys with heavy-duty, high-speed bearings
* High-flow conical air filter
* Edelbrock aluminum engine covers
* Plug and play, electrical harness, installation hardware
* 3.5 in. supercharger pulley

    Gen IV Universal Supercharger Kit | LS7

    Edelbrock

    MSRP: $7,499.99
    $5,999.99
    Edelbrock E-Force universal supercharger systems have been designed for engine swaps into street rods and musclecars. They feature 12 in. long runners for maximum low-end torque and great drivability. They are capable of an incredible 600+ flywheel...
    MSRP: $7,499.99
    $5,999.99