null

Nissan 240SX LSx Swaps

Nissan 240SX LSx Swaps

Tired of that anorexic engine in your 240sx/Sxx? Well, no more - now you can get some V8 grunt in your JDM, and even turbo it to boot! HAHA! Total sleeper status....why? #becauseyoushould!

  • Edelbrock E-Force universal supercharger systems have been designed for engine swaps into street rods and musclecars. They feature 12 in. long runners for maximum low-end torque and great drivability. They are capable of an incredible 600+ flywheel horsepower and 550+ lbs.-ft. of torque. If you're looking for a supercharger system for your hot rod that's designed to provide instantly reliable horsepower with low boost for minimum stress on your engine, look no further than Edelbrock E-Force universal supercharger systems--they're exactly what you need for your engine swap project. Edelbrock E-Force universal supercharger systems include the following components: * Supercharger manifold assembly * Cast aluminum tensioner/idler bracket * Cast aluminum engine valley tray * Heavy-duty automatic belt tensioner * Dual, high-capacity, bar and plate, intercoolers * High-flow 95mm mass airflow sensor housing * Extruded aluminum fuel rails with -6 AN lines * Custom-molded intercooler hoses with quick-connect fittings * Electric intercooler water pump * Intercooler recovery tank * Fuel injectors * Steel idler pulleys with heavy-duty, high-speed bearings * High-flow conical air filter * Edelbrock aluminum engine covers * Plug and play, electrical harness, installation hardware * 3.5 in. supercharger pulley
    Add to Cart
    Quick view

    Gen IV Universal Supercharger Kit | LS2

    Edelbrock

    MSRP: $6,999.99
    $5,899.99
    Edelbrock E-Force universal supercharger systems have been designed for engine swaps into street rods and musclecars. They feature 12 in. long runners for maximum low-end torque and great drivability. They are capable of an incredible 600+ flywheel...
    MSRP: $6,999.99
    $5,899.99
    Add to Cart Quick view
  • Edelbrock E-Force universal supercharger systems have been designed for engine swaps into street rods and musclecars. They feature 12 in. long runners for maximum low-end torque and great drivability. They are capable of an incredible 600+ flywheel horsepower and 550+ lbs.-ft. of torque. If you're looking for a supercharger system for your hot rod that's designed to provide instantly reliable horsepower with low boost for minimum stress on your engine, look no further than Edelbrock E-Force universal supercharger systems--they're exactly what you need for your engine swap project. Edelbrock E-Force universal supercharger systems include the following components: * Supercharger manifold assembly * Cast aluminum tensioner/idler bracket * Cast aluminum engine valley tray * Heavy-duty automatic belt tensioner * Dual, high-capacity, bar and plate, intercoolers * High-flow 95mm mass airflow sensor housing * Extruded aluminum fuel rails with -6 AN lines * Custom-molded intercooler hoses with quick-connect fittings * Electric intercooler water pump * Intercooler recovery tank * Fuel injectors * Steel idler pulleys with heavy-duty, high-speed bearings * High-flow conical air filter * Edelbrock aluminum engine covers * Plug and play, electrical harness, installation hardware * 3.5 in. supercharger pulley
    Add to Cart
    Quick view

    Gen IV Universal Supercharger Kit | LS3/L92C

    Edelbrock

    MSRP: $7,999.99
    $6,899.99
    Edelbrock E-Force universal supercharger systems have been designed for engine swaps into street rods and musclecars. They feature 12 in. long runners for maximum low-end torque and great drivability. They are capable of an incredible 600+ flywheel...
    MSRP: $7,999.99
    $6,899.99
    Add to Cart Quick view
  • Now you have the complete engine swap for your Nissan 240 - everything from A-Z. Please click product description for more details Now you have the complete engine swap for your Nissan 240 - everything from A-Z. Please click product description for more details
    Add to Cart
    Quick view

    89-94 Nissan 240SX/S13-S15 LS Swap Kit w/ DS

    LSxEverything

    MSRP: $2,699.99
    $2,399.99
     Now you can drop in that LS of your choosing with very little fuss or headache! This kit includes the following: Adjustable motor mount kit with Poly Bushings, made of thick 1/4" 304 Stainless Steel Mounts with Brace!   Kit Includes the...
    MSRP: $2,699.99
    $2,399.99
    Add to Cart Quick view
  • Now you have the complete engine swap for your Nissan 240 - everything from A-Z. Please click product description for more details Now you have the complete engine swap for your Nissan 240 - everything from A-Z. Please click product description for more details
    Add to Cart
    Quick view

    89-94 Nissan 240SX/Sxx LS Swap Kit

    LSxEverything

    MSRP: $1,399.99
    $1,299.99
     Now you can drop in that LS of your choosing with very little fuss or headache! This kit includes the following: Adjustable motor mount kit with Poly Bushings, made of thick 1/4" 304 Stainless Steel Mounts with Brace!   Kit Includes the...
    MSRP: $1,399.99
    $1,299.99
    Add to Cart Quick view
  • Tired of that boring little motor in your 240SX/Silvia? YANK IT! Drop this in! Includes motor mounts, frame brackets, transmission crossmember, transmission mount, and hardware. Manufactured from the highest grade American made steel. They're laser cut, precision bent, powder coated and feature polyurethane bushings. Comes with a lifetime free replacement warranty on the bushings. Includes motor mounts, frame brackets, transmission crossmember, transmission mount, and hardware. Manufactured from the highest grade American made steel. They're laser cut, precision bent, powder coated and feature polyurethane bushings. Click for more! Tired of that boring little motor in your 240SX/Silvia? YANK IT! Drop this in! Includes motor mounts, frame brackets, transmission crossmember, transmission mount, and hardware. Manufactured from the highest grade American made steel. They're laser cut, precision bent, powder coated and feature polyurethane bushings. Comes with a lifetime free replacement warranty on the bushings. Includes motor mounts, frame brackets, transmission crossmember, transmission mount, and hardware. Manufactured from the highest grade American made steel. They're laser cut, precision bent, powder coated and feature polyurethane bushings. Click for more!
    Add to Cart
    Quick view

    89-98 240SX/Silvia | LS Swap Kit

    LSxEverything

    MSRP: $2,199.99
    $1,799.99
    Tired of that boring little motor in your 240SX/Silvia? YANK IT! Drop this in! Includes motor mounts, frame brackets, transmission crossmember, transmission mount, and hardware.  Manufactured from the highest grade American made steel. They're...
    MSRP: $2,199.99
    $1,799.99
    Add to Cart Quick view
  • Now you can drop in that LS of your choosing with very little fuss or headache! This kit includes the following: Adjustable motor mount kit with Poly Bushings, made of thick 1/4" 304 Stainless Steel Mounts with Brace! Now you can drop in that LS of your choosing with very little fuss or headache! This kit includes the following: Adjustable motor mount kit with Poly Bushings, made of thick 1/4" 304 Stainless Steel Mounts with Brace!
    Add to Cart
    Quick view

    95-98 Nissan 240SX/S14 LS Swap Kit

    LSxEverything

    MSRP: $999.99
    $899.99
    Now you can drop in that LS of your choosing with very little fuss or headache! This kit includes the following: Adjustable motor mount kit with Poly Bushings, made of thick 1/4" 304 Stainless Steel Mounts with Brace!   Kit Includes the...
    MSRP: $999.99
    $899.99
    Add to Cart Quick view
  • Product Info and Spec: Intercooler Kit: Bar & Plate Construction Core Size: 24"x12"x4" Overall Size: 31"x12"x4" 4" Thick Core, 3" Inlet & Outlet 3" Aluminum Piping Kit 50mm BOV
    Add to Cart
    Quick view

    FMIC forSilvia/240SX withLSx

    LSxEverything

    $649.99
    Product Info and Spec: Intercooler Kit: Bar & Plate Construction Core Size: 24"x12"x4" Overall Size: 31"x12"x4" 4" Thick Core, 3" Inlet & Outlet 3" Aluminum Piping Kit 50mm BOV Items Included： Intercooler 3" Piping Silicon Hoses...
    $649.99
    Add to Cart Quick view
  • Edelbrock E-Force universal supercharger systems have been designed for engine swaps into street rods and musclecars. They feature 12 in. long runners for maximum low-end torque and great drivability. They are capable of an incredible 600+ flywheel horsepower and 550+ lbs.-ft. of torque. If you're looking for a supercharger system for your hot rod that's designed to provide instantly reliable horsepower with low boost for minimum stress on your engine, look no further than Edelbrock E-Force universal supercharger systems--they're exactly what you need for your engine swap project. Edelbrock E-Force universal supercharger systems include the following components: * Supercharger manifold assembly * Cast aluminum tensioner/idler bracket * Cast aluminum engine valley tray * Heavy-duty automatic belt tensioner * Dual, high-capacity, bar and plate, intercoolers * High-flow 95mm mass airflow sensor housing * Extruded aluminum fuel rails with -6 AN lines * Custom-molded intercooler hoses with quick-connect fittings * Electric intercooler water pump * Intercooler recovery tank * Fuel injectors * Steel idler pulleys with heavy-duty, high-speed bearings * High-flow conical air filter * Edelbrock aluminum engine covers * Plug and play, electrical harness, installation hardware * 3.5 in. supercharger pulley
    Add to Cart
    Quick view

    Gen III Universal Supercharger Kit | LS1/LS6

    Edelbrock

    MSRP: $7,799.99
    $6,899.99
    Edelbrock E-Force universal supercharger systems have been designed for engine swaps into street rods and musclecars. They feature 12 in. long runners for maximum low-end torque and great drivability. They are capable of an incredible 600+ flywheel...
    MSRP: $7,799.99
    $6,899.99
    Add to Cart Quick view
  • Edelbrock E-Force universal supercharger systems have been designed for engine swaps into street rods and musclecars. They feature 12 in. long runners for maximum low-end torque and great drivability. They are capable of an incredible 600+ flywheel horsepower and 550+ lbs.-ft. of torque. If you're looking for a supercharger system for your hot rod that's designed to provide instantly reliable horsepower with low boost for minimum stress on your engine, look no further than Edelbrock E-Force universal supercharger systems--they're exactly what you need for your engine swap project. Edelbrock E-Force universal supercharger systems include the following components: * Supercharger manifold assembly * Cast aluminum tensioner/idler bracket * Cast aluminum engine valley tray * Heavy-duty automatic belt tensioner * Dual, high-capacity, bar and plate, intercoolers * High-flow 95mm mass airflow sensor housing * Extruded aluminum fuel rails with -6 AN lines * Custom-molded intercooler hoses with quick-connect fittings * Electric intercooler water pump * Intercooler recovery tank * Fuel injectors * Steel idler pulleys with heavy-duty, high-speed bearings * High-flow conical air filter * Edelbrock aluminum engine covers * Plug and play, electrical harness, installation hardware * 3.5 in. supercharger pulley
    Add to Cart
    Quick view

    Gen IV Universal Supercharger Kit | LS3/L92V

    Edelbrock

    MSRP: $7,499.99
    $6,299.99
    Edelbrock E-Force universal supercharger systems have been designed for engine swaps into street rods and musclecars. They feature 12 in. long runners for maximum low-end torque and great drivability. They are capable of an incredible 600+ flywheel...
    MSRP: $7,499.99
    $6,299.99
    Add to Cart Quick view
  • Edelbrock E-Force universal supercharger systems have been designed for engine swaps into street rods and musclecars. They feature 12 in. long runners for maximum low-end torque and great drivability. They are capable of an incredible 600+ flywheel horsepower and 550+ lbs.-ft. of torque. If you're looking for a supercharger system for your hot rod that's designed to provide instantly reliable horsepower with low boost for minimum stress on your engine, look no further than Edelbrock E-Force universal supercharger systems--they're exactly what you need for your engine swap project. Edelbrock E-Force universal supercharger systems include the following components: * Supercharger manifold assembly * Cast aluminum tensioner/idler bracket * Cast aluminum engine valley tray * Heavy-duty automatic belt tensioner * Dual, high-capacity, bar and plate, intercoolers * High-flow 95mm mass airflow sensor housing * Extruded aluminum fuel rails with -6 AN lines * Custom-molded intercooler hoses with quick-connect fittings * Electric intercooler water pump * Intercooler recovery tank * Fuel injectors * Steel idler pulleys with heavy-duty, high-speed bearings * High-flow conical air filter * Edelbrock aluminum engine covers * Plug and play, electrical harness, installation hardware * 3.5 in. supercharger pulley
    Add to Cart
    Quick view

    Gen IV Universal Supercharger Kit | LS7

    Edelbrock

    MSRP: $7,499.99
    $5,999.99
    Edelbrock E-Force universal supercharger systems have been designed for engine swaps into street rods and musclecars. They feature 12 in. long runners for maximum low-end torque and great drivability. They are capable of an incredible 600+ flywheel...
    MSRP: $7,499.99
    $5,999.99
    Add to Cart Quick view
  • Big T76 Turbo, Good For 600 WHP to the Wheel. 3" Turbo Downpipe LSx Turbo Kit for S13/S14/240SX It Is A Simple Setup for Drifters Who Want Big Power, Comes with Many Innovative Features: 1. Keeps Radiator at Stock Location. 2. Use A Patented Twin 2.5" to T4 Cast Merge Collector, Provides the Best Flow for Turbo Spooling. 3. Support Big T4 Turbo (We Used T76 Turbo for This Setup), Up to 600 WHP 4. Support Dual 44MM Vband Wastegate Product Being Sold: T76 Turbo, Manifolds, Downpipes & Wastegate Product Info and Spec: Turbo and Wastegates: - 4" Air Inlet, 2.5" Compressed Air Outlet - Standard T4 Flange - 76mm Wheel Compressor - P Trim .96 A/R Turbine - 3" V-band Hot Side - 44mm Wastegate 8 PSI (2 pcs) Manifolds: - High Flow Mandrel Bent Runners - 2.5" Cross Pipe - Supports T4 Turbo - Supports Dual 44mm Wastegate - Twin 2.5" to T4 Cast Merge Collector Provides The Best Exhaust Flow Downpipe: - 3" Vband Connects to Turbo - 3" Stainless Steel Downpipe - Downpipe Ends Somewhere Close to the Transmission End - You Will Need to Come Up with The Rest Of the Exhaust System Item Inclueded: -T76 Turbo x1 -Turbo Manifold Downpipe Kit x1 -44MM 8Psi V Band Wastegate x2 -Oil Filter Sandwich and Oil Line Kit x1 -Air Filter x1 -Set of Vband Clamp x1 -Twin 2.5" to T4 Elbow Adapter x1 Big T76 Turbo, Good For 600 WHP to the Wheel. 3" Turbo Downpipe LSx Turbo Kit for S13/S14/240SX It Is A Simple Setup for Drifters Who Want Big Power, Comes with Many Innovative Features: 1. Keeps Radiator at Stock Location. 2. Use A Patented Twin 2.5" to T4 Cast Merge Collector, Provides the Best Flow for Turbo Spooling. 3. Support Big T4 Turbo (We Used T76 Turbo for This Setup), Up to 600 WHP 4. Support Dual 44MM Vband Wastegate Product Being Sold: T76 Turbo, Manifolds, Downpipes & Wastegate Product Info and Spec: Turbo and Wastegates: - 4" Air Inlet, 2.5" Compressed Air Outlet - Standard T4 Flange - 76mm Wheel Compressor - P Trim .96 A/R Turbine - 3" V-band Hot Side - 44mm Wastegate 8 PSI (2 pcs) Manifolds: - High Flow Mandrel Bent Runners - 2.5" Cross Pipe - Supports T4 Turbo - Supports Dual 44mm Wastegate - Twin 2.5" to T4 Cast Merge Collector Provides The Best Exhaust Flow Downpipe: - 3" Vband Connects to Turbo - 3" Stainless Steel Downpipe - Downpipe Ends Somewhere Close to the Transmission End - You Will Need to Come Up with The Rest Of the Exhaust System Item Inclueded: -T76 Turbo x1 -Turbo Manifold Downpipe Kit x1 -44MM 8Psi V Band Wastegate x2 -Oil Filter Sandwich and Oil Line Kit x1 -Air Filter x1 -Set of Vband Clamp x1 -Twin 2.5" to T4 Elbow Adapter x1
    Choose Options
    Quick view

    LSx 240SX | S13 | S14 Turbo Kit

    LSxEverything

    $3,499.99
    Big T76 Turbo, Good For 600 WHP to the Wheel. 3" Turbo Downpipe LSx Turbo Kit for S13/S14/240SXIt Is A Simple Setup for Drifters Who Want Big Power, Comes with Many Innovative Features:1. Keeps Radiator at Stock Location.2. Use A Patented Twin 2.5"...
    $3,499.99
    Choose Options Quick view
  • Big T76 Turbo, Good For 600 WHP to the Wheel. 3" Turbo Downpipe LSx Turbo Kit for S13/S14/240SX It Is A Simple Setup for Drifters Who Want Big Power, Comes with Many Innovative Features: 1. Keeps Radiator at Stock Location. 2. Use A Patented Twin 2.5" to T4 Cast Merge Collector, Provides the Best Flow for Turbo Spooling. 3. Support Big T4 Turbo (We Used T76 Turbo for This Setup), Up to 600 WHP 4. Support Dual 44MM Vband Wastegate Product Being Sold: T76 Turbo, Manifolds, Downpipes & Wastegate Product Info and Spec: Turbo and Wastegates: - 4" Air Inlet, 2.5" Compressed Air Outlet - Standard T4 Flange - 76mm Wheel Compressor - P Trim .96 A/R Turbine - 3" V-band Hot Side - 44mm Wastegate 8 PSI (2 pcs) Manifolds: - High Flow Mandrel Bent Runners - 2.5" Cross Pipe - Supports T4 Turbo - Supports Dual 44mm Wastegate - Twin 2.5" to T4 Cast Merge Collector Provides The Best Exhaust Flow Downpipe: - 3" Vband Connects to Turbo - 3" Stainless Steel Downpipe - Downpipe Ends Somewhere Close to the Transmission End - You Will Need to Come Up with The Rest Of the Exhaust System Item Inclueded: -T76 Turbo x1 -Turbo Manifold Downpipe Kit x1 -44MM 8Psi V Band Wastegate x2 -Oil Filter Sandwich and Oil Line Kit x1 -Air Filter x1 -Set of Vband Clamp x1 -Twin 2.5" to T4 Elbow Adapter x1 Big T76 Turbo, Good For 600 WHP to the Wheel. 3" Turbo Downpipe LSx Turbo Kit for S13/S14/240SX It Is A Simple Setup for Drifters Who Want Big Power, Comes with Many Innovative Features: 1. Keeps Radiator at Stock Location. 2. Use A Patented Twin 2.5" to T4 Cast Merge Collector, Provides the Best Flow for Turbo Spooling. 3. Support Big T4 Turbo (We Used T76 Turbo for This Setup), Up to 600 WHP 4. Support Dual 44MM Vband Wastegate Product Being Sold: T76 Turbo, Manifolds, Downpipes & Wastegate Product Info and Spec: Turbo and Wastegates: - 4" Air Inlet, 2.5" Compressed Air Outlet - Standard T4 Flange - 76mm Wheel Compressor - P Trim .96 A/R Turbine - 3" V-band Hot Side - 44mm Wastegate 8 PSI (2 pcs) Manifolds: - High Flow Mandrel Bent Runners - 2.5" Cross Pipe - Supports T4 Turbo - Supports Dual 44mm Wastegate - Twin 2.5" to T4 Cast Merge Collector Provides The Best Exhaust Flow Downpipe: - 3" Vband Connects to Turbo - 3" Stainless Steel Downpipe - Downpipe Ends Somewhere Close to the Transmission End - You Will Need to Come Up with The Rest Of the Exhaust System Item Inclueded: -T76 Turbo x1 -Turbo Manifold Downpipe Kit x1 -44MM 8Psi V Band Wastegate x2 -Oil Filter Sandwich and Oil Line Kit x1 -Air Filter x1 -Set of Vband Clamp x1 -Twin 2.5" to T4 Elbow Adapter x1
    Choose Options
    Quick view

    LSx 240SX | Turbo Kit | Hard Times

    LSxEverything

    $3,299.99
    Big T76 Turbo, Good For 600 WHP to the Wheel. 3" Turbo Downpipe LSx Turbo Kit for S13/S14/240SXIt Is A Simple Setup for Drifters Who Want Big Power, Comes with Many Innovative Features:1. Keeps Radiator at Stock Location.2. Use A Patented Twin 2.5"...
    $3,299.99
    Choose Options Quick view