Turbocharger Systems

Turbocharger Systems

turbochargers-garrett-tomei-cxracing.jpg

  • On Sale
    LS Swap Kit/Twin Turbo Kit For 1963-1965 Chevrolet Chevelle 

Kill two birds with one stone! LS Swap your Chevelle AND twin turboit at the same time! 
Note:
Due to Front Grill and Bumper Support Difference, This Kit ONLY Fits 1963-1965 Chevelle, Does NOT Fit 1966+ Chevelle Perfectly. Modification to Intercooler Brackets, and Piping Are Needed if You Try to Fit This Kit on 1966+ Chevelle.


Includes the Following:
- T4 GT35 Turbo x One Pair
- 46 mm WG x One Pair
- Oil Line Kit + Oil Fittings
- Oil Pan
- Engine Mounts
- Manifold x One Pair
- Downpipe x One Pair
- Dump Tube x One Pair
- V-band Clamps x 6 Pcs

Motor Mounts:
- Heavy Duty 7 Gauge (0.18") Thick Stainless Steel Panel, with Brace Offers Strong Support
- Adjustable Slotted Bolt Holes
- Polyurethane Bushing Mounts
- Patented Design of Motor Mount, Excellent Strength
- Works with Chevelle Factory Transmission Mount, Just Need to Move Back By Around 2.5"

Oil Pan:
- Rear Sump Pan
- Built-in with Baffles for High Performance and Race Applications
- 1/2" Thick Aluminum CNC Cut Flange
- AN8 Oil Port Fitting for External Oil Filter and/or Oil Cooler
- Holds 5 1/2 Qt of Oil

T4 GT35 Turbos and Wastegates:
- 4" Air Inlet
- 2.5" Compressed Air Outlet
- Standard T4 Turbine Housing Flange
- 3" Vband Exhaust Outlet
- Journal Bearing
- .70 A/R Compressor
- .68 A/R Turbine
- 46 mm Vband 8 PSI Wastegate

Manifolds:
- Twin T4 Turbo Manifold, Support Dual 44mm or 46mm Wastegate
- 1.65" Runner
- 3" Vband Outlet with 46mm WG Flange

Turbo Elbow:
- T4 Turbo Flange (to Turbo Side)
- 3" Vband FLange (to Header Side)
- Cast 304 Stainless Steel

Downpipe and Dump Tube:
- Dual 3" Vband Downpipe, Fits 3" Vband Turbo Exhaust Housing
- Dual 46mm WG Dump Tube

LS Swap Kit/Twin Turbo Kit For 1963-1965 Chevrolet Chevelle 

Kill two birds with one stone! LS Swap your Chevelle AND twin turboit at the same time! 
Note:
Due to Front Grill and Bumper Support Difference, This Kit ONLY Fits 1963-1965 Chevelle, Does NOT Fit 1966+ Chevelle Perfectly. Modification to Intercooler Brackets, and Piping Are Needed if You Try to Fit This Kit on 1966+ Chevelle.


Includes the Following:
- T4 GT35 Turbo x One Pair
- 46 mm WG x One Pair
- Oil Line Kit + Oil Fittings
- Oil Pan
- Engine Mounts
- Manifold x One Pair
- Downpipe x One Pair
- Dump Tube x One Pair
- V-band Clamps x 6 Pcs

Motor Mounts:
- Heavy Duty 7 Gauge (0.18") Thick Stainless Steel Panel, with Brace Offers Strong Support
- Adjustable Slotted Bolt Holes
- Polyurethane Bushing Mounts
- Patented Design of Motor Mount, Excellent Strength
- Works with Chevelle Factory Transmission Mount, Just Need to Move Back By Around 2.5"

Oil Pan:
- Rear Sump Pan
- Built-in with Baffles for High Performance and Race Applications
- 1/2" Thick Aluminum CNC Cut Flange
- AN8 Oil Port Fitting for External Oil Filter and/or Oil Cooler
- Holds 5 1/2 Qt of Oil

T4 GT35 Turbos and Wastegates:
- 4" Air Inlet
- 2.5" Compressed Air Outlet
- Standard T4 Turbine Housing Flange
- 3" Vband Exhaust Outlet
- Journal Bearing
- .70 A/R Compressor
- .68 A/R Turbine
- 46 mm Vband 8 PSI Wastegate

Manifolds:
- Twin T4 Turbo Manifold, Support Dual 44mm or 46mm Wastegate
- 1.65" Runner
- 3" Vband Outlet with 46mm WG Flange

Turbo Elbow:
- T4 Turbo Flange (to Turbo Side)
- 3" Vband FLange (to Header Side)
- Cast 304 Stainless Steel

Downpipe and Dump Tube:
- Dual 3" Vband Downpipe, Fits 3" Vband Turbo Exhaust Housing
- Dual 46mm WG Dump Tube

    1963-1965 Chevelle LS Swap/Twin Turbo Kit

    LSxEverything

    MSRP: $3,999.99
    Now: $3,299.99
    Was: $3,899.99
    LS Swap Kit/Twin Turbo Kit For 1963-1965 Chevrolet Chevelle  Kill two birds with one stone! LS Swap your Chevelle AND twin turbo it at the same time! Includes the Following:- T4 GT35 Turbo x One Pair- 46 mm WG x One Pair- Oil Line Kit + Oil...
    MSRP: $3,999.99
    Now: $3,299.99
    Was: $3,899.99
  • This is the turbo kit you have been looking for! 
Now you have the perfect option for your under powered Chevy/GMC Truck! Tired of not being able to get your dually out of its own way? Now you have the right option, and you don't need a Cummins to get it done and have that sound! LS Swap it and GO TURBO! Please note that for best results, you will want to use our Motor Mounts for your swap.

Perfect Fitment. Keeps All Stock Parts and Accessories. MAF Sensor Wires May Need to Be Cut and Extended.
The standard kit comes with a single Big T4 Turbo Provision, Supports 700-800 WHP. The standard turbo is most efficient up to 18psi, the ball bearing turbos are efficient up to 22-35 psi each, depending on which version you get (ball bearing vs. billet ball bearing).
60mm Vband WG and 50mm BOV Provision
2.5" Cross Pipe
3" Turbo Downpipe then Enlarged to 3.5" Exhaust Pipe  

For Larger Vortec V8 (5.3L, 6.0L) with Built Motor and Larger Turbo, This Kit Supports 700-800 WHP with the standard turbo. Expect more with the Turbo Upgrades and intercooler.  Don't forget to your fuel injector upgrade

 Includes:

-T76 Turbo, with Filter
-Turbo Headers + Cross Pipe (3 pieces)
-Downpipe (3 pieces)
-Dump Pipe (1 piece)
-Wastegate
-2.5'' Vband Clamp x2
-3'' Vband Clamp x3
-T4 Turbo Elbow Adapter x1
-Oil Line Kit

Product Info and Specs:

Manifold:
-Custom designed for 4.8/5.3/6.0. Keeps All Stock Parts and Accessories Stainless Steel 1.65" Runner Tube
-T4 Turbo Elbow Adapter. Flexible Fitment For Many Turbos.
-60mm Vband Wastegate Provision
-2.5" Cross Pipe with Vband Connections
-Comes with 60mm WG Dump Tube
Downpipe:
-2 pcs 3" Downpipe Connects to Turbo (Fits Turbo with 3" Vband Exhaust Outlet)
-3.5" Straight Exhaust Pipe

T4 Turbo and Wastegate:
-4" Air Inlet
-2.5" Compressed Air Outlet
-Wet Floating Bearings
-Standard T4 Flange
-76mm Wheel Compressor
-.81 A/R Turbine
-3" V-band Hot Side
-60 mm 12Psi V-Band Wastegate
Note:

Intercooler Kit Upgrade is available from the dropdown menu above. Please select your intercooler size, and it will be added to your turbo kit.

-Exhaust Pipe Is 3.5 Straight Pipe, It Does NOT Have Flange Welded, You Will Need To Fabricate the Rest of the Exhaust System.
-Off Road or Track Use ONLY, NOT for Street Use. This is the turbo kit you have been looking for! 
Now you have the perfect option for your under powered Chevy/GMC Truck! Tired of not being able to get your dually out of its own way? Now you have the right option, and you don't need a Cummins to get it done and have that sound! LS Swap it and GO TURBO! Please note that for best results, you will want to use our Motor Mounts for your swap.

Perfect Fitment. Keeps All Stock Parts and Accessories. MAF Sensor Wires May Need to Be Cut and Extended.
The standard kit comes with a single Big T4 Turbo Provision, Supports 700-800 WHP. The standard turbo is most efficient up to 18psi, the ball bearing turbos are efficient up to 22-35 psi each, depending on which version you get (ball bearing vs. billet ball bearing).
60mm Vband WG and 50mm BOV Provision
2.5" Cross Pipe
3" Turbo Downpipe then Enlarged to 3.5" Exhaust Pipe  

For Larger Vortec V8 (5.3L, 6.0L) with Built Motor and Larger Turbo, This Kit Supports 700-800 WHP with the standard turbo. Expect more with the Turbo Upgrades and intercooler.  Don't forget to your fuel injector upgrade

 Includes:

-T76 Turbo, with Filter
-Turbo Headers + Cross Pipe (3 pieces)
-Downpipe (3 pieces)
-Dump Pipe (1 piece)
-Wastegate
-2.5'' Vband Clamp x2
-3'' Vband Clamp x3
-T4 Turbo Elbow Adapter x1
-Oil Line Kit

Product Info and Specs:

Manifold:
-Custom designed for 4.8/5.3/6.0. Keeps All Stock Parts and Accessories Stainless Steel 1.65" Runner Tube
-T4 Turbo Elbow Adapter. Flexible Fitment For Many Turbos.
-60mm Vband Wastegate Provision
-2.5" Cross Pipe with Vband Connections
-Comes with 60mm WG Dump Tube
Downpipe:
-2 pcs 3" Downpipe Connects to Turbo (Fits Turbo with 3" Vband Exhaust Outlet)
-3.5" Straight Exhaust Pipe

T4 Turbo and Wastegate:
-4" Air Inlet
-2.5" Compressed Air Outlet
-Wet Floating Bearings
-Standard T4 Flange
-76mm Wheel Compressor
-.81 A/R Turbine
-3" V-band Hot Side
-60 mm 12Psi V-Band Wastegate
Note:

Intercooler Kit Upgrade is available from the dropdown menu above. Please select your intercooler size, and it will be added to your turbo kit.

-Exhaust Pipe Is 3.5 Straight Pipe, It Does NOT Have Flange Welded, You Will Need To Fabricate the Rest of the Exhaust System.
-Off Road or Track Use ONLY, NOT for Street Use.

    1964-1991 GM Truck Turbo Kit

    LSxEverything

    MSRP: $3,999.00
    $2,999.99
    This is the turbo kit you have been looking for! Now you have the perfect option for your under powered Chevy/GMC Truck! Tired of not being able to get your dually out of its own way? Now you have the right option, and you don't need a Cummins to...
    MSRP: $3,999.00
    $2,999.99
  • This is the turbo kit you have been looking for! 


Now you have the perfect option for your under powered Chevy/GMC Truck! Tired of not being able to get your dually out of its own way? Now you have the right option, and you don't need a Cummins to get it done and have that sound! LS Swap it and GO TURBO! Please note that for best results, you will want to use our Motor Mounts for your swap.


Perfect Fitment. Keeps All Stock Parts and Accessories. MAF Sensor Wires May Need to Be Cut and Extended.
The standard kit comes with a single Big T4 Turbo Provision, Supports 700-800 WHP. The standard turbo is most efficient up to 18psi, the ball bearing turbos are efficient up to 22-35 psi each, depending on which version you get (ball bearing vs. billet ball bearing).
60mm Vband WG and 50mm BOV Provision
2.5" Cross Pipe
3" Turbo Downpipe then Enlarged to 3.5" Exhaust Pipe  

For Larger Vortec V8 (5.3L, 6.0L) with Built Motor and Larger Turbo, This Kit Supports 700-800 WHP with the standard turbo. Expect more with the Turbo Upgrades and intercooler.  Don't forget to your fuel injector upgrade

 Includes:

-T76 Turbo, with Filter
-Turbo Headers + Cross Pipe (3 pieces)
-Downpipe (3 pieces)
-Dump Pipe (1 piece)
-Wastegate
-2.5'' Vband Clamp x2
-3'' Vband Clamp x3
-T4 Turbo Elbow Adapter x1
-Oil Line Kit

Product Info and Specs:

Manifold:
-Custom designed for 4.8/5.3/6.0. Keeps All Stock Parts and Accessories Stainless Steel 1.65" Runner Tube
-T4 Turbo Elbow Adapter. Flexible Fitment For Many Turbos.
-60mm Vband Wastegate Provision
-2.5" Cross Pipe with Vband Connections
-Comes with 60mm WG Dump Tube

Downpipe:
-2 pcs 3" Downpipe Connects to Turbo (Fits Turbo with 3" Vband Exhaust Outlet)
-3.5" Straight Exhaust Pipe

T4 Turbo and Wastegate:
-4" Air Inlet
-2.5" Compressed Air Outlet
-Wet Floating Bearings
-Standard T4 Flange
-76mm Wheel Compressor
-.81 A/R Turbine
-3" V-band Hot Side
-60 mm 12Psi V-Band Wastegate

Note:

Intercooler Kit Upgrade is available from the dropdown menu above. Please select your intercooler size, and it will be added to your turbo kit.

-Exhaust Pipe Is 3.5 Straight Pipe, It Does NOT Have Flange Welded, You Will Need To Fabricate the Rest of the Exhaust System.
-Off Road or Track Use ONLY, NOT for Street Use. This is the turbo kit you have been looking for! 


Now you have the perfect option for your under powered Chevy/GMC Truck! Tired of not being able to get your dually out of its own way? Now you have the right option, and you don't need a Cummins to get it done and have that sound! LS Swap it and GO TURBO! Please note that for best results, you will want to use our Motor Mounts for your swap.


Perfect Fitment. Keeps All Stock Parts and Accessories. MAF Sensor Wires May Need to Be Cut and Extended.
The standard kit comes with a single Big T4 Turbo Provision, Supports 700-800 WHP. The standard turbo is most efficient up to 18psi, the ball bearing turbos are efficient up to 22-35 psi each, depending on which version you get (ball bearing vs. billet ball bearing).
60mm Vband WG and 50mm BOV Provision
2.5" Cross Pipe
3" Turbo Downpipe then Enlarged to 3.5" Exhaust Pipe  

For Larger Vortec V8 (5.3L, 6.0L) with Built Motor and Larger Turbo, This Kit Supports 700-800 WHP with the standard turbo. Expect more with the Turbo Upgrades and intercooler.  Don't forget to your fuel injector upgrade

 Includes:

-T76 Turbo, with Filter
-Turbo Headers + Cross Pipe (3 pieces)
-Downpipe (3 pieces)
-Dump Pipe (1 piece)
-Wastegate
-2.5'' Vband Clamp x2
-3'' Vband Clamp x3
-T4 Turbo Elbow Adapter x1
-Oil Line Kit

Product Info and Specs:

Manifold:
-Custom designed for 4.8/5.3/6.0. Keeps All Stock Parts and Accessories Stainless Steel 1.65" Runner Tube
-T4 Turbo Elbow Adapter. Flexible Fitment For Many Turbos.
-60mm Vband Wastegate Provision
-2.5" Cross Pipe with Vband Connections
-Comes with 60mm WG Dump Tube

Downpipe:
-2 pcs 3" Downpipe Connects to Turbo (Fits Turbo with 3" Vband Exhaust Outlet)
-3.5" Straight Exhaust Pipe

T4 Turbo and Wastegate:
-4" Air Inlet
-2.5" Compressed Air Outlet
-Wet Floating Bearings
-Standard T4 Flange
-76mm Wheel Compressor
-.81 A/R Turbine
-3" V-band Hot Side
-60 mm 12Psi V-Band Wastegate

Note:

Intercooler Kit Upgrade is available from the dropdown menu above. Please select your intercooler size, and it will be added to your turbo kit.

-Exhaust Pipe Is 3.5 Straight Pipe, It Does NOT Have Flange Welded, You Will Need To Fabricate the Rest of the Exhaust System.
-Off Road or Track Use ONLY, NOT for Street Use.

    1994-2007 GM Truck LS Turbo Kit

    LSxEverything

    MSRP: $3,999.99
    $2,849.99
    This is the turbo kit you have been looking for! Now you have the perfect option for your under powered Chevy/GMC Truck! Tired of not being able to get your dually out of its own way? Now you have the right option, and you don't need a Cummins to...
    MSRP: $3,999.99
    $2,849.99
  • 1999-2018 6.0 LS Rotating Assembly

    SCAT

    MSRP: $2,999.99
    $2,699.99
    When making big power is in your future, look no further than a proper build kit like this one from SMM! This Scat Modern Muscle engine rotating assembly is equipped with high-quality Scat forged 4340 crankshafts and I-beam connecting rods with 7/16 in...
    MSRP: $2,999.99
    $2,699.99
  • Turbo & Intercooler Piping Kit For 2007-2014 Cadillac Escalade 6.2L V8 AWD & Other Trucks  
Finally! You can boost your Chevy/GMC/Cadillac Truck or SUV! Make that human hauler SCOOT!
    Big T76 Turbo Supports 600-700 HP Depends on Engine Build and Boost Level
    60mm 12 PSI Wastegate
    Big 4" Core Intercooler, with Aluminum Mounting Brackets, Perfect Fitment, No Cut
    Mandrel Bent 3" Aluminum Piping Kit, with 50mm BOV
    3" Stainless Steel Header Cross Pipe and Downpipe. 

Items in the Kit
 Turbo Manifold Downpipe Kit 
 Turbocharger 
 Oil Filter Sandwich and Oil Line Kit 
 Air Filter 
 60mm 12PSI V-band Wastegate 
 Set of V-band Clamp
 Intercooler with Mounting Brackets 
 Piping Kit with Hoses and Clamps 
 BOV 

Turbo & Intercooler Piping Kit For 2007-2014 Cadillac Escalade 6.2L V8 AWD & Other Trucks  
Finally! You can boost your Chevy/GMC/Cadillac Truck or SUV! Make that human hauler SCOOT!
    Big T76 Turbo Supports 600-700 HP Depends on Engine Build and Boost Level
    60mm 12 PSI Wastegate
    Big 4" Core Intercooler, with Aluminum Mounting Brackets, Perfect Fitment, No Cut
    Mandrel Bent 3" Aluminum Piping Kit, with 50mm BOV
    3" Stainless Steel Header Cross Pipe and Downpipe. 

Items in the Kit
 Turbo Manifold Downpipe Kit 
 Turbocharger 
 Oil Filter Sandwich and Oil Line Kit 
 Air Filter 
 60mm 12PSI V-band Wastegate 
 Set of V-band Clamp
 Intercooler with Mounting Brackets 
 Piping Kit with Hoses and Clamps 
 BOV

    2007-2014 Escalade Turbo Kit

    LSxEverything

    MSRP: $4,499.99
    $2,999.99
    Turbo & Intercooler Piping Kit For 2007-2014 Cadillac Escalade 6.2L V8 AWD & Other Trucks  Finally! You can boost your Chevy/GMC/Cadillac Truck or SUV! Make that human hauler SCOOT!    Big T76 Turbo Supports 600-700...
    MSRP: $4,499.99
    $2,999.99
  • Turbo, Intercooler & Piping Kit For 2009-2015 Chevrolet Camaro with LS3 Engine. 
304 Stainless High Flow Header


T4 T76 Turbo, with 0.81 AR Exhaust Housing, Fast Spool. 
Dual 44mm V-band wastegate
3" Intercooler with Polished Aluminum Piping
3" Stainless Steel Downpipes, Connects to Stock Catback Exhaust System

Included in kit
- T76 Turbocharger 
- Twin Turbo Header downpipe kit 
- 44mm 8 PSI V-band wastegate 
- Oil Filter Sandwich and Oil Line Kit
- Set of V-band Clamp 
- Aluminum Intercooler, with Mounting Brackets 
- Aluminum Intercooler Piping Kit 
- Set of Silicon Hose 
- Set of T-bolt Clamp
- Blow Off Valve 
- Mushroom Air Filter 
- Coil Pack Relocation Bracket Turbo, Intercooler & Piping Kit For 2009-2015 Chevrolet Camaro with LS3 Engine. 
304 Stainless High Flow Header


T4 T76 Turbo, with 0.81 AR Exhaust Housing, Fast Spool. 
Dual 44mm V-band wastegate
3" Intercooler with Polished Aluminum Piping
3" Stainless Steel Downpipes, Connects to Stock Catback Exhaust System

Included in kit
- T76 Turbocharger 
- Twin Turbo Header downpipe kit 
- 44mm 8 PSI V-band wastegate 
- Oil Filter Sandwich and Oil Line Kit
- Set of V-band Clamp 
- Aluminum Intercooler, with Mounting Brackets 
- Aluminum Intercooler Piping Kit 
- Set of Silicon Hose 
- Set of T-bolt Clamp
- Blow Off Valve 
- Mushroom Air Filter 
- Coil Pack Relocation Bracket

    2009-2015 Camaro Single Turbo Kit

    LSxEverything

    MSRP: $3,899.99
    $2,999.99
    FREE SHIPPING Create a HellCat/Demon Killer! Turbo, Intercooler & Piping Kit For 2009-2015 Chevrolet Camaro with LS3 Engine. Good for 800+HP.  T4 T76 Turbo, with 0.81 AR Exhaust Housing, Fast Spool.  Dual 44mm V-band wastegate 3"...
    MSRP: $3,899.99
    $2,999.99
  • Free Shipping in the United States!
Send a mixture of nitrous and essential enriching fuel into the intake runner and allow you to select boost. Kit includes the (empty) bottle, solenoids, switches, fittings, stainless braided hose, and all hardware needed for installation.

    40-100 HP Nitrous System

    Edelbrock

    MSRP: $1,299.99
    $999.99
    Edelbrock EFI nitrous systems give you large, adjustable horsepower gains in your choice of wet or dry approaches. Wet systems send a mixture of nitrous and essential enriching fuel into the intake runner and allow you to select boost from 50 to 70 hp...
    MSRP: $1,299.99
    $999.99
  • Instead of building your most prized possession with a Junkyard Dropout with medium to high miles, save some time, and start with this High Performance Chevy 408 short block. You already know that the LS iron-block is a super stout platform for high-horsepower engines in their stock form, but this is an super improved version of it. These engines are hand-built, balanced, and blueprinted using top-quality parts. Don't waste time trying to salvage a questionable short block when you can get a fresh mill that is ready for your choice of components to make it your own.

It features 6-bolt mains, aligned and honed main bores, a Manley 4340 Forged Crankshaft, 4.00 in. stroke, Manley Forged 4340 H-Beam Connecting Rods, Manley Forged Aluminum Dish Pistons. Deck Height is 9.240.

Snag this today, and get your boosting on! Instead of building your most prized possession with a Junkyard Dropout with medium to high miles, save some time, and start with this High Performance Chevy 408 short block. You already know that the LS iron-block is a super stout platform for high-horsepower engines in their stock form, but this is an super improved version of it. These engines are hand-built, balanced, and blueprinted using top-quality parts. Don't waste time trying to salvage a questionable short block when you can get a fresh mill that is ready for your choice of components to make it your own.

It features 6-bolt mains, aligned and honed main bores, a Manley 4340 Forged Crankshaft, 4.00 in. stroke, Manley Forged 4340 H-Beam Connecting Rods, Manley Forged Aluminum Dish Pistons. Deck Height is 9.240.

Snag this today, and get your boosting on!

    408 CI | High Performance Block | 700HP

    Chevrolet Performance

    MSRP: $5,999.99
    $4,489.99
    Instead of building your most prized possession with a Junkyard Dropout with medium to high miles, save some time, and start with this High Performance Chevy 408 short block. You already know that the LS iron-block is a super stout platform for...
    MSRP: $5,999.99
    $4,489.99
  • You guys have been asking for it....and we have finished it! It is here! The Twin Turbo Kit for the 67-69 Camaro & Firebird is Ready for you! Now you can make a solid 800-1000 HP with this bolt-on kit! Everyone has been enjoying the power, fit and finish of our other turbo kits! Now you can really increase the net horsepower of your stable...especially if you have one of our other kits in your vehicles already (we find most popular combo is the C10 Turbo Kit and demand for the Camaro Kit). FREE SHIPPING in the CONUS!

Specifications:
304 Stainless Steel Headers,1.75" Runner Pipes with 4-1 Perfect Merge Collector
T4 GT35 Turbo with 0.68 AR Exhaust Housing, Fast Spool
44mm Vband 8 PSI Wastegate
3" Core Intercooler, 3" Inlet/Outlet
3" Cold Pipes and 2.5" Hot Pipes
50mm BOV
3" Stainless Downpipe
1.5" Radiator Hard Pipes

Items Included:
-Twin Turbo Headers with Downpipes (1)
-GT35 T4 Turbocharger, with Air Filter (2)
-44mm 8 psi V-Band Wastegates (2)
-Oil Line Kit (1)
-Intercooler, with Mounting Bracket (1)
-Intercooler Piping Kit with Hoses and Clamps (1)
-Radiator Hard Pipe Kit with Hoses and Clamps (1)
-50mm BOV (1)
-Set of V-band Clamps (1)
-Front Nose/Hood Latch Support Bracket For Intercooler (1)
You guys have been asking for it....and we have finished it! It is here! The Twin Turbo Kit for the 67-69 Camaro & Firebird is Ready for you! Now you can make a solid 800-1000 HP with this bolt-on kit! Everyone has been enjoying the power, fit and finish of our other turbo kits! Now you can really increase the net horsepower of your stable...especially if you have one of our other kits in your vehicles already (we find most popular combo is the C10 Turbo Kit and demand for the Camaro Kit). FREE SHIPPING in the CONUS!

Specifications:
304 Stainless Steel Headers,1.75" Runner Pipes with 4-1 Perfect Merge Collector
T4 GT35 Turbo with 0.68 AR Exhaust Housing, Fast Spool
44mm Vband 8 PSI Wastegate
3" Core Intercooler, 3" Inlet/Outlet
3" Cold Pipes and 2.5" Hot Pipes
50mm BOV
3" Stainless Downpipe
1.5" Radiator Hard Pipes

Items Included:
-Twin Turbo Headers with Downpipes (1)
-GT35 T4 Turbocharger, with Air Filter (2)
-44mm 8 psi V-Band Wastegates (2)
-Oil Line Kit (1)
-Intercooler, with Mounting Bracket (1)
-Intercooler Piping Kit with Hoses and Clamps (1)
-Radiator Hard Pipe Kit with Hoses and Clamps (1)
-50mm BOV (1)
-Set of V-band Clamps (1)
-Front Nose/Hood Latch Support Bracket For Intercooler (1)

    67-69 F-Body Twin Turbo Kit

    LSxEverything

    MSRP: $4,599.99
    $3,799.99
    You guys have been asking for it....and we have finished it! It is here! The Twin Turbo Kit for the 67-69 Camaro & Firebird is Ready for you! Now you can make a solid 800-1000 HP with this bolt-on kit! Everyone has been enjoying the power, fit and...
    MSRP: $4,599.99
    $3,799.99