1978-1981 G-Body

1978-1981 G-Body

1978-1987 G-body Malibu LS Conversion Kit

This swap kit is for (78-83) Malibu (78-87) El Camino & (81-87) Regal/Grand National. It was designed around our LH8 oil pan kit. The frame brackets bolt into existing holes in the frame so you know the engine will have clearance for accessory drives, factory AC box, power brake booster, and aftermarket suspension components. Unlike others, our kit positions the engine so there is no steering interference and maintains the proper drive-line angle for smooth highway cruising. We offer a complete line of Muscle Rods headers that give unparalleled performance and ground clearance with sizes that are matched to your engine combo. These combined parts offer an easy, strong, and clean installation of your LS engine.

  • For those of you working on custom applications we offer our engine mounts separately. To ensure proper driveline angle we recommend getting the Mount and Crossmember kit together for standard LS swaps.

    78-88 G-Body Motor Mounts

    LSxEverything

    MSRP: $449.99
    $299.99
    For those of you working on custom applications we offer our engine mounts separately. To ensure proper driveline angle we recommend getting the Mount and Crossmember kit together for standard LS swaps.
    MSRP: $449.99
    $299.99
  • 
We offer several sizes of headers so you can match them to your engine combination. Our 1 3/4" mid-length headers offer great ground clearance and support up to 500hp. Our 1 ¾” long-tubes will support up to 600hp. For more than 600hp we offer 1 7/8” long-tubes and for big cubic inch monster engines our 2" is a perfect match. Our stepped headers offer great high rpm performance while retaining good low and mid-range power. They all include gaskets, bolts, reducers, and O2 sensor bungs

    78-88 G-Body Swap Headers

    LSxEverything

    MSRP: $999.99
    $749.99
    These are not your average swap headers. These headers offer many feature that are normally only on custom race headers. We start with 3/8" laser cut flanges with the tubes welded inside and out and then machined. The long tube headers feature bolt-on...
    MSRP: $999.99
    $749.99
  • Harness Includes Circuits For:
A/C & Heat
Accessory / Cigarette Lighter
Backup Lights
Brake Lights
Charging
Dome Light
Electric Choke
Emergency Flashers
Fan Relay Activation Power
Fused Power Source
Headlights
Horn (Relay)
Ignition Coil
Instrument Panel Lighting and Gauges*
Park Lights
Radio/Clock (Constant and Switched)
Starting
Tail Lights
Third Brake Light
Turn Signals
Wipers
*Includes Wires For:
Fuel Gauge
Oil Gauge
Tachometer
Temperature Gauge
Voltmeter
Connectors Included:
GM Steering Column Turn Switch and Ignition Switch
Dimmer Switch
(2) Headlight Pigtails
10SI & 12 SI Alternator
HEI Power and Tach and (20) Extra 56 Series Terminals for use with any Factory GM 56 Series Connector such as Headlight Switch, Wiper Switch or A/C Switch/Blower Motor
Specifications:

Type
21 Circuit
Circuit Quantity
21
Fuse Block Included
Yes
Fuse Block Location
Front
Fuse Style
ATO/ATC
Ignition Key Location
Column
Quantity
Sold as a kit
Harness Length
Extra-long

Harness Includes Circuits For:
A/C & Heat
Accessory / Cigarette Lighter
Backup Lights
Brake Lights
Charging
Dome Light
Electric Choke
Emergency Flashers
Fan Relay Activation Power
Fused Power Source
Headlights
Horn (Relay)
Ignition Coil
Instrument Panel Lighting and Gauges*
Park Lights
Radio/Clock (Constant and Switched)
Starting
Tail Lights
Third Brake Light
Turn Signals
Wipers
*Includes Wires For:
Fuel Gauge
Oil Gauge
Tachometer
Temperature Gauge
Voltmeter
Connectors Included:
GM Steering Column Turn Switch and Ignition Switch
Dimmer Switch
(2) Headlight Pigtails
10SI & 12 SI Alternator
HEI Power and Tach and (20) Extra 56 Series Terminals for use with any Factory GM 56 Series Connector such as Headlight Switch, Wiper Switch or A/C Switch/Blower Motor
Specifications:

Type
21 Circuit
Circuit Quantity
21
Fuse Block Included
Yes
Fuse Block Location
Front
Fuse Style
ATO/ATC
Ignition Key Location
Column
Quantity
Sold as a kit
Harness Length
Extra-long

    Classic Chassis Harness | 21 Circuit

    Painless Performance

    MSRP: $699.99
    $499.99
    Customizable The Highest Quality Wire You Can Buy:Painless uses high-temperature, abrasion-resistant TXL wire which has twice the voltage rating of standard, general purpose wire. It withstands up to 275° and does not kink. Compact,...
    MSRP: $699.99
    $499.99
  • On Sale
    Our Coil Relocation Kit alleviates the problem of the rear coils hitting the power brake booster or air conditioning box when swapping the LS engines into early vehicles. The relocation brackets are laser cut from brushed stainless steel for a great clean appearance. It relocates the rear coil upwards to provide adequate clearance for power brake boosters and air conditioning. Each kit includes all necessary hardware along with one of our 12” high performance spark plug wires. Installation is easy, the brackets bolt to the valve cover using existing mounting holes on factory valve covers (as well as most aftermarket valve covers). Our Coil Relocation Kit alleviates the problem of the rear coils hitting the power brake booster or air conditioning box when swapping the LS engines into early vehicles. The relocation brackets are laser cut from brushed stainless steel for a great clean appearance. It relocates the rear coil upwards to provide adequate clearance for power brake boosters and air conditioning. Each kit includes all necessary hardware along with one of our 12” high performance spark plug wires. Installation is easy, the brackets bolt to the valve cover using existing mounting holes on factory valve covers (as well as most aftermarket valve covers). They are available for all styles of coils and each side separately or together to add symmetry to your installation

    Coil Pack Relocation Kit & Wires

    LSxEverything

    $274.99 - $384.98
    Our Coil Relocation Kit alleviates the problem of the rear coils hitting the power brake booster or air conditioning box when swapping the LS engines into early vehicles. The relocation brackets are laser cut from brushed stainless steel for a great...
    $274.99 - $384.98
  • Control Arm Style: Tubular
Cross Shaft Length (in): 14.210 in.
Cross Pin Material: Chromoly
Ball Joint Included: Yes
Adjustable: No
Hardware Included: No
Control Arm Material: Steel
Control Arm Finish: Red powdercoated
Bushings Included: Yes
Bushing Material: Delrin
Quantity: Sold as a kit.
Notes: Ball joints are 1/2 in. taller than standard height ball joints.

    Front Adjustable Control Arms

    UMI

    MSRP: $1,499.99
    $1,299.99
    UMI Performance front non-adjustable upper and lower A-arm kits. These sets not only save you dollars, but weight on your front-end, while adding increased strength, improved ride quality, and reduced bushing deflection. Built from strong DOM tubing,...
    MSRP: $1,499.99
    $1,299.99
  • Not only are you going to bring the amazing reliability and modability of the LS Motor to your Grand National, Cutlass, Monte Carlo, El Camino, Malibu, Bonneville, Grand Prix, but you are also now going to add amazing power to your Cutlass with the Twin Turbo kit. Includes Turbo Headers, Downpipes, Turbos, Wastegates, Intercooler, Piping Kit, BOV. 

Not only are you going to bring the amazing reliability and modability of the LS Motor to your Grand National, Cutlass, Monte Carlo, El Camino, Malibu, Bonneville, Grand Prix, but you are also now going to add amazing power to your Cutlass with the Twin Turbo kit. Includes Turbo Headers, Downpipes, Turbos, Wastegates, Intercooler, Piping Kit, BOV.

    G-Body Twin Turbo Kit | LS/LSx

    LSxEverything

    MSRP: $4,199.99
    $2,999.99
    Twin Turbo Intercooler Kit For GM G-Body Cars with LSx Motor Swap. Dual T4 T76 Turbo, Dual 46mm Wastegate with Big Front Mount Intercooler Kit. Supports 900-1000 WHP. Not only are you going to bring the amazing reliability and modability of the LS...
    MSRP: $4,199.99
    $2,999.99
  • Edelbrock E-Force universal supercharger systems have been designed for engine swaps into street rods and musclecars. They feature 12 in. long runners for maximum low-end torque and great drivability. They are capable of an incredible 600+ flywheel horsepower and 550+ lbs.-ft. of torque. If you're looking for a supercharger system for your hot rod that's designed to provide instantly reliable horsepower with low boost for minimum stress on your engine, look no further than Edelbrock E-Force universal supercharger systems--they're exactly what you need for your engine swap project. 

Edelbrock E-Force universal supercharger systems include the following components:

* Supercharger manifold assembly
* Cast aluminum tensioner/idler bracket
* Cast aluminum engine valley tray
* Heavy-duty automatic belt tensioner
* Dual, high-capacity, bar and plate, intercoolers
* High-flow 95mm mass airflow sensor housing 
* Extruded aluminum fuel rails with -6 AN lines
* Custom-molded intercooler hoses with quick-connect fittings
* Electric intercooler water pump
* Intercooler recovery tank
* Fuel injectors
* Steel idler pulleys with heavy-duty, high-speed bearings
* High-flow conical air filter
* Edelbrock aluminum engine covers
* Plug and play, electrical harness, installation hardware
* 3.5 in. supercharger pulley

    Gen III Universal Supercharger Kit | LS1/LS6

    Edelbrock

    MSRP: $7,799.99
    $6,899.99
    Edelbrock E-Force universal supercharger systems have been designed for engine swaps into street rods and musclecars. They feature 12 in. long runners for maximum low-end torque and great drivability. They are capable of an incredible 600+ flywheel...
    MSRP: $7,799.99
    $6,899.99