Corvette LSx/LTx Swaps

Corvette LSx/LTx Swaps

 Time to update old with something faithful - your modern day LS engine! We can help you!

c2-vette.jpg

  • Edelbrock E-Force universal supercharger systems have been designed for engine swaps into street rods and musclecars. They feature 12 in. long runners for maximum low-end torque and great drivability. They are capable of an incredible 600+ flywheel horsepower and 550+ lbs.-ft. of torque. If you're looking for a supercharger system for your hot rod that's designed to provide instantly reliable horsepower with low boost for minimum stress on your engine, look no further than Edelbrock E-Force universal supercharger systems--they're exactly what you need for your engine swap project. Edelbrock E-Force universal supercharger systems include the following components: * Supercharger manifold assembly * Cast aluminum tensioner/idler bracket * Cast aluminum engine valley tray * Heavy-duty automatic belt tensioner * Dual, high-capacity, bar and plate, intercoolers * High-flow 95mm mass airflow sensor housing * Extruded aluminum fuel rails with -6 AN lines * Custom-molded intercooler hoses with quick-connect fittings * Electric intercooler water pump * Intercooler recovery tank * Fuel injectors * Steel idler pulleys with heavy-duty, high-speed bearings * High-flow conical air filter * Edelbrock aluminum engine covers * Plug and play, electrical harness, installation hardware * 3.5 in. supercharger pulley
    Add to Cart
    Quick view

    Gen IV Universal Supercharger Kit | LS2

    Edelbrock

    MSRP: $6,999.99
    $5,899.99
    Edelbrock E-Force universal supercharger systems have been designed for engine swaps into street rods and musclecars. They feature 12 in. long runners for maximum low-end torque and great drivability. They are capable of an incredible 600+ flywheel...
    MSRP: $6,999.99
    $5,899.99
    Add to Cart Quick view
  • On Sale
    Baer Brakes Baer Claw Pro+ disc brake systems are built to please the most demanding users. They include Baer 6P compact 6-piston calipers machined from 2618 forgings, resulting in the stiffest possible design, even at extreme operating temperatures. They use radial mounting configurations to disperse loads evenly, and internal fluid transfer tube passages for an ultra-clean look. Baer Brakes Baer Claw Pro+ disc brake systems include brake rotors with zinc coated surfaces and a matched set of brake pads. The unique 2-piece rotors use an aluminum hat to reduce overall weight, allow for differential expansion of the rotor plates, and lower thermal transfer to the hub.
    Choose Options
    Quick view

    14" 6-Piston Caliper Brake Kit

    Baer

    MSRP: $2,999.99
    Now: $2,149.99
    Was: $2,249.99
    Baer Brakes Baer Claw Pro+ disc brake systems are built to please the most demanding users. They include Baer 6P compact 6-piston calipers machined from 2618 forgings, resulting in the stiffest possible design, even at extreme operating temperatures...
    MSRP: $2,999.99
    Now: $2,149.99
    Was: $2,249.99
    Choose Options Quick view
  • Free Shipping in the United States! Send a mixture of nitrous and essential enriching fuel into the intake runner and allow you to select boost. Kit includes the (empty) bottle, solenoids, switches, fittings, stainless braided hose, and all hardware needed for installation.
    Add to Cart
    Quick view

    40-100 HP Nitrous System

    Edelbrock

    MSRP: $1,299.99
    $999.99
    Edelbrock EFI nitrous systems give you large, adjustable horsepower gains in your choice of wet or dry approaches. Wet systems send a mixture of nitrous and essential enriching fuel into the intake runner and allow you to select boost from 50 to 70 hp...
    MSRP: $1,299.99
    $999.99
    Add to Cart Quick view
  • Corvette Tank Time! These conversion fuel tanks solve the problem of supplying your new LS engine with a steady flow of fuel. The tanks, made specifically for your car, feature a recessed area in the top for the fuel pump module and sending unit, so no modifications are needed for clearance. They have an innovative baffling system inside to control fuel slosh and keep the pump fed even at low fuel levels and extreme driving conditions. They are galvanized steel and powder coated silver for maximum durability. The kit includes a fuel sending unit designed to work with your factory style fuel gauge. The included fuel pump module features an in-tank wiring harness and three ports - one for the feed line, one for the return line, and one for the vent. The kit has two available Walbro fuel pump options. The standard 255 LPH pump or the 400 LPH pump for supercharged or 550+hp applications. The kit also includes tank straps, vent filter, gaskets, and hardware. They look like original equipment from under the car and are absolutely the best way to go when converting to EFI. Fits 63-67 Corvette
    Choose Options
    Quick view

    63-67 Corvette Fuel Tank

    Walbro

    MSRP: $999.99
    $669.99
    Corvette Tank Time! These conversion fuel tanks solve the problem of supplying your new LS engine with a steady flow of fuel. The tanks, made specifically for your car, feature a recessed area in the top for the fuel pump module and sending unit, so no...
    MSRP: $999.99
    $669.99
    Choose Options Quick view
  • 1963-1967 Corvette LS Conversion Kit This swap kit is for the 1963-1967 Corvette. It was designed around our 4th gen f-body and CTS-V oil pans. It bolts into existing holes in the frame and was designed to give you the most options for front accessory drives. Unlike others, our kit positions the engine so there is no steering interference and maintains the proper drive-line angle for smooth highway cruising. It provides clearance for the factory AC box, power brake booster, and aftermarket suspension components. We offer a complete line of Muscle Rods headers that give unparalleled performance and ground clearance with sizes that are matched to your engine combo. These combined parts offer an easy, strong, and clean installation of your LS engine. See our installation guide for more info on this LS swap.
    Choose Options
    Quick view

    63-67 Corvette Motor/Trans Mounts

    LSxEverything

    MSRP: $799.99
    $529.99
      1963-1967 Corvette LS Conversion Kit This swap kit is for the 1963-1967 Corvette. It was designed around our 4th gen f-body and CTS-V oil pans. It bolts into existing holes in the frame and was designed to give you the most options for front...
    MSRP: $799.99
    $529.99
    Choose Options Quick view
  • Now you can complete your LS Swap in your Corvette with an OEM-radiator with modern cooling characteristics Our radiators feature all-aluminum construction, but unlike any others on the market, they have beautifully stamped tanks with strengthening indentations just like your original. They're a double pass design putting the inlet and outlet on the same side which greatly simplifies plumbing to the engine! The steam port bung is welded into the upper part of the tank which allows your new LS engine to vent properly. Features a coolant temp fan switch in the tank. Excellent restoration type quality made in the USA. Available in bare aluminum or black and optional 16" high performance electric fan installed.
    Choose Options
    Quick view

    63-67 Corvette Radiator

    LSxEverything

    MSRP: $799.99
    $599.99
    Now you can complete your LS Swap in your Corvette with an OEM-radiator with modern cooling characteristics Our radiators feature all-aluminum construction, but unlike any others on the market, they have beautifully stamped tanks with strengthening...
    MSRP: $799.99
    $599.99
    Choose Options Quick view
  • Do you want cooling improvement and performance? During a test, a Be Cool aluminum radiator was installed in a 1955 Chevy in about an hour and lowered its operating temperature from 220 degrees to 180 degrees F--even with the air conditioning going full-blast. Be Cool custom-fit aluminum radiators are designed to be a direct fit, and they feature 15 percent more cooling capacity than factory 4-core models. What's more, they can be used with all brands of antifreeze and are available in both standard and polished finishes.
    Choose Options
    Quick view

    63-72 LSx Aluminum Radiator

    Be Cool

    MSRP: $899.99
    $729.99
    Do you want cooling improvement and performance? During a test, a Be Cool aluminum radiator was installed in a 1955 Chevy in about an hour and lowered its operating temperature from 220 degrees to 180 degrees F--even with the air conditioning going...
    MSRP: $899.99
    $729.99
    Choose Options Quick view
  • Add to Cart
    Quick view

    68-79 Corvette Fuel Tank

    Walbro

    MSRP: $899.99
    $729.99
    Corvette Tank Time! These conversion fuel tanks solve the problem of supplying your new LS engine with a steady flow of fuel. The tanks, made specifically for your car, feature a recessed area in the top for the fuel pump module and sending unit, so no...
    MSRP: $899.99
    $729.99
    Add to Cart Quick view
  • Engine and Transmission Mount Kit Includes motor mounts, frame brackets, transmission crossmember, transmission mount, and hardware. Manufactured from the highest grade American made steel. They're laser cut, precision bent, powder coated and feature polyurethane bushings. Comes with a lifetime free replacement warranty on the bushings.
    Add to Cart
    Quick view

    68-82 Corvette Motor & Trans Mount

    LSxEverything

    $529.99
    Engine and Transmission Mount Kit Includes motor mounts, frame brackets, transmission crossmember, transmission mount, and hardware.  Manufactured from the highest grade American made steel. They're laser cut, precision bent, powder coated and...
    $529.99
    Add to Cart Quick view
  • F-body Oil Pan The f-body oil pan gives a little more ground clearance but does not clear the factory power assist slave cylinder. The CTS-V pan is needed if running factory style power steering. Includes windage tray, pickup tube, hardware, gasket, and dipstick.
    Add to Cart
    Quick view

    68-82 Corvette Oil Pan

    $399.99
    F-body Oil Pan The f-body oil pan gives a little more ground clearance but does not clear the factory power assist slave cylinger. The CTS-V pan is needed if running factory style power steering. Includes windage tray, pickup tube, hardware, gasket, and...
    $399.99
    Add to Cart Quick view