GM Truck Headers 55-98

GM Truck Headers 55-98

A must for your C10/C20/C30 or C1500/C2500/C3500 - don't skimp here....trust you will be happier 

ultimate-1.jpg

  • On Sale
    MagnaFlow MF Series Performance exhaust systems are designed for those seeking increased performance and better economy. They feature straight-through flow designs for the ultimate in unrestricted horsepower and torque—while maintaining exhaust efficiency. An engineered balance of interior and exterior noise levels, MF Series kits deliver the smooth, deep sound you want and the wide-open performance power you need. These systems feature all mandrel-bent tubing and 409 stainless steel construction. They're available in numerous configurations, including cat-back, rear axle-back, crossmember-back, and particulate filter-back; single, dual, or tri mufflers; and one, two, or four outlets. Many tip options are offered, as well. Built to last, MagnaFlow MF Series Performance exhaust systems carry a lifetime construction warranty, and are tested against SAE j1169 standards. Order the model tailored for your specific vehicle.

Chevy/GM Truck 1961-1972
Exhaust System, Crossmember-Back, Stainless Steel, Tru-X, Chevy, GMC, Pickup, RWD, Small Block, Kit,
System Material:409 stainless steel
System Style:Crossmember back
Exit Quantity:Two
Exit Location:Split side
System Finish:Natural
Catalytic Converter(s) Included:No
Intermediate Pipe Diameter (in):2.500 in.
Muffler Included:Yes
Muffler Quantity:Two
Muffler Configuration:Single inlet/Single outlet
 Muffler Style:Turbo
 Muffler Material:409 stainless steel
 Muffler Finish:Polished
 Exhaust Type:Dual
 Hardware Included:Yes
 Inlet Quantity:Two
 Tailpipe Diameter (in):2.500 in.
 Tip Included:No
 Quantity:Sold as a kit.
 Notes:Kit includes polished mufflers and Tru-X pipe. Designed to work with original style exhaust manifolds or tubular headers.

    60-72 Chevy Truck Magnaflow Exhaust System

    Magnaflow

    MSRP: $899.99
    Now: $659.99
    Was: $699.99
      MagnaFlow MF Series Performance exhaust systems are designed for those seeking increased performance and better economy. They feature straight-through flow designs for the ultimate in unrestricted horsepower and torque—while maintaining...
    MSRP: $899.99
    Now: $659.99
    Was: $699.99
  • These Headers are designed specifically for installing an LS engine into 1967-98 Chevy/GMC 1/2 Ton Trucks and SUVs (C10, C15, C1500, R10, R1500 trucks, Suburbans, Yukons and Tahoes), and are available in a variety of tube lengths and diameters. These headers will work with our LS Swap kits.

These headers are 1 3/4" long tube and ceramic coated.

    64-98 Chevy/GMC Truck Headers | 1 3/4" LTC

    Hedman

    MSRP: $1,099.99
    $999.99
    These Headers are designed specifically for installing an LS engine into 1967-98 Chevy/GMC 1/2 Ton Trucks and SUVs (C10, C15, C1500, R10, R1500 trucks, Suburbans, Yukons and Tahoes), and are available in a variety of tube lengths and diameters...
    MSRP: $1,099.99
    $999.99
  • These Headers are designed specifically for installing an LS engine into 1967-98 Chevy/GMC 1/2 Ton Trucks and SUVs (C10, C15, C1500, R10, R1500 trucks, Suburbans, Yukons and Tahoes), and are available in a variety of tube lengths and diameters. ALL MUSCLE RODS HEDDERS are available in uncoated mild steel, or with Hedman's original HTC or Husler's NEW BLACK MAXX Ceramic Coating. These headers will work with our LS Swap kits.

These headers are 1 3/4" mid length and uncoated.

    64-98 Chevy/GMC Truck Headers | 1 3/4" ML

    Hedman

    MSRP: $599.99
    $499.99
    These Headers are designed specifically for installing an LS engine into 1967-98 Chevy/GMC 1/2 Ton Trucks and SUVs (C10, C15, C1500, R10, R1500 trucks, Suburbans, Yukons and Tahoes), and are available in a variety of tube lengths and diameters...
    MSRP: $599.99
    $499.99
  • These Headers are designed specifically for installing an LS engine into 1967-98 Chevy/GMC 1/2 Ton Trucks and SUVs (C10, C15, C1500, R10, R1500 trucks, Suburbans, Yukons and Tahoes), and are available in a variety of tube lengths and diameters.. These headers will work with our LS Swap kits.

These headers are 1 3/4" mid length and ceramic coated.

    64-98 Chevy/GMC Truck Headers | 1 3/4" MLC

    Hedman

    MSRP: $799.99
    $699.99
    These Headers are designed specifically for installing an LS engine into 1967-98 Chevy/GMC 1/2 Ton Trucks and SUVs (C10, C15, C1500, R10, R1500 trucks, Suburbans, Yukons and Tahoes), and are available in a variety of tube lengths and diameters...
    MSRP: $799.99
    $699.99
  • These Headers are designed specifically for installing an LS engine into 1967-98 2WD Chevy/GMC 1/2 Ton Trucks and SUVs (C10, C15, C1500, R10, R1500 trucks, Suburbans, Yukons and Tahoes), and are available in a variety of tube lengths and diameters. These headers will work with our LS Swap kits.

These headers are 1 7/8" long tube and uncoated.

    67-98 Chevy/GMC Truck Headers | 1 7/8" LT

    Hedman

    MSRP: $799.99
    $699.99
    These Headers are designed specifically for installing an LS engine into 1967-98 2WD Chevy/GMC 1/2 Ton Trucks and SUVs (C10, C15, C1500, R10, R1500 trucks, Suburbans, Yukons and Tahoes), and are available in a variety of tube lengths and diameters...
    MSRP: $799.99
    $699.99
  • For the price, no other part can give you the horsepower and fuel economy improvements of Hedman headers. They make Hedman Street headers so well that they guarantee them to be free from defects--including cracks in the tubes and welds--for the life of the headers. Hedman Street headers are available in black painted or their polished HTC thermal ceramic coated finishes and, as an added bonus, they also come with all necessary gaskets and mounting hardware. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts, and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom-altered parts, then it is the installer's responsibility to verify fitment. For the price, no other part can give you the horsepower and fuel economy improvements of Hedman headers. They make Hedman Street headers so well that they guarantee them to be free from defects--including cracks in the tubes and welds--for the life of the headers. Hedman Street headers are available in black painted or their polished HTC thermal ceramic coated finishes and, as an added bonus, they also come with all necessary gaskets and mounting hardware. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts, and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom-altered parts, then it is the installer's responsibility to verify fitment.

    99-06 GM Truck/Hummer/Escalade Headers

    Hedman

    MSRP: $799.99
    $729.99
    For the price, no other part can give you the horsepower and fuel economy improvements of Hedman headers. They make Hedman Street headers so well that they guarantee them to be free from defects--including cracks in the tubes and welds--for the life of...
    MSRP: $799.99
    $729.99
  • We have been working with Ultimate Headers to develop these awesome headers to work with our LS engine swap kits. They feature investment cast flanges that provide a custom look never available before. They are made from race proven 321 Stainless Steel tubing for light weight and durability. The 1 7/8" primary tubes have shown on the dyno that they will support nearly 600hp with virtually no disadvantage to long tube headers. They're available in a brushed satin finish, a mirror polish, or a black ceramic coating. They come with stainless bolts and washer, stainless gaskets, and investment cast collector flanges that are unwelded to give you installation options. If you're looking to give your project the sculpted elegance of a true work of art, these are the headers for you.

    C10 64-91 Ultimate Stainless Headers

    LSxEverything

    MSRP: $1,699.99
    $1,399.99
    Ultimate Headers We have been working with Ultimate Headers to develop these awesome headers to work with our LS engine swap kits. They feature investment cast flanges that provide a custom look never available before. They are made from race proven 321...
    MSRP: $1,699.99
    $1,399.99
  • Exhaust Cutouts

    Quick Time Performance

    MSRP: $499.99
    $399.99
    With Quick Time electric cutouts, you can have the best of both worlds--they're quiet for the street and wide-open for the strip. These electrically controlled exhaust valves bolt to standard cutouts and can be opened and closed from inside of the car...
    MSRP: $499.99
    $399.99
  • We offer several sizes of headers so you can match them to your engine combination. Our 1 5/8” mid-length headers offer great ground clearance and support up to 400hp. Our 1 ¾” long-tubes will support up to 600hp. For more than 600hp we offer 1 7/8” long-tubes and for big cubic inch monster engines our 2" is a perfect match. Our stepped headers offer great high rpm performance while retaining good low and mid-range power. They all include gaskets, bolts, reducers, and O2 sensor bungs. Click for more info

    Full Size Truck Headers | 1964-1998

    LSxEverything

    MSRP: $699.99
    $599.99
    These are not your average swap headers. These headers offer many feature that are normally only on custom race headers. We start with 3/8" laser cut flanges with the tubes welded inside and out and then machined. The long tube headers feature bolt-on...
    MSRP: $699.99
    $599.99
  • On Sale
    These Quick Time Performance oval electric cutouts feature a new low-profile design for any car or truck that has limited ground clearance. They provide the best of both worlds! They're quiet for the street and wide-open for the strip. Go from stealth quiet to wide-open power and experience the gains, even if you're already enjoying an aftermarket exhaust system. You control the volume and the power. You can open your exhaust with the flip of a switch or you can run it closed, all the way open, or at any position in between.

The Quick Time Performance oval electric cutouts also feature: 

* CNC-machined 6061 aircraft aluminum body
* Stainless steel butterfly plate and shaft
* 6061 aircraft aluminum motor plate
* High-torque DC gear-driven motor
* toggle switch
* Weatherproof connectors with gold plated contacts
Tubing Diameter (in): 3.000 in.
Exhaust Cutout Style: Electric
Exhaust Cutout Material: Aluminum
Exhaust Cutout Finish: Natural
Exhaust Cutout Installation: Bolt-on
Quantity: Sold as a pair.
Notes: Dual oval valve, will fit 2.500 in. to 3.000 in. diameter exhaust pipes. Designed to be welded directly into exhaust pipes; fabrication and welding required. Bolt pattern measures 3.875. x 2.750 in.

    Oval Exhaust Cutouts

    Quick Time Performance

    MSRP: $599.99
    Now: $479.99
    Was: $489.99
    These Quick Time Performance oval electric cutouts feature a new low-profile design for any car or truck that has limited ground clearance. They provide the best of both worlds! They're quiet for the street and wide-open for the strip. Go from stealth...
    MSRP: $599.99
    Now: $479.99
    Was: $489.99