Crossmembers

Crossmembers

65-72-truck-xmbr-mm.jpg

Finish strong with your swap...crossmembers take the guess work out of your build.

  • Mount and Crossmember Kit
Includes motor mounts, frame brackets, transmission crossmember, transmission mount, and hardware.  Manufactured from the highest grade American made steel. They're laser cut, precision bent, powder coated and feature polyurethane bushings.  Comes with a lifetime free replacement warranty on the bushings.

    1967-1969 F-Body LS Swap Kit

    LSxEverything

    MSRP: $799.99
    $519.99
    Mount and Crossmember Kit for 67-69 F-Body Includes motor mounts, frame brackets, transmission crossmember, transmission mount, and hardware.  Manufactured from the highest grade American made steel. They're laser cut, precision bent, powder coated...
    MSRP: $799.99
    $519.99
  • Mount and Crossmember Kit for Camaro, Firebird, Z28, Trans Am, and Formula.
Includes motor mounts, frame brackets, transmission crossmember, transmission mount, and hardware.  Manufactured from the highest grade American made steel. They're laser cut, precision bent, powder coated and feature polyurethane bushings.  Comes with a lifetime free replacement warranty on the bushings.

    1970-1981 F-Body LS Swap Kit

    LSxEverything

    MSRP: $629.00
    $549.99
    Mount and Crossmember Kit Includes motor mounts, frame brackets, transmission crossmember, transmission mount, and hardware.  Manufactured from the highest grade American made steel. They're laser cut, precision bent, powder coated and feature...
    MSRP: $629.00
    $549.99
  • Mount and Crossmember Kit for Camaro, Firebird, Z28, Trans Am, and Formula.

Includes motor mounts, frame brackets, transmission crossmember, transmission mount, and hardware.  Manufactured from the highest grade American made steel. They're laser cut, precision bent, powder coated and feature polyurethane bushings.  Comes with a lifetime free replacement warranty on the bushings.

    1982-1992 F-Body LS Swap Kit

    LSxEverything

    $549.99
    Mount and Crossmember Kit Includes motor mounts, frame brackets, transmission crossmember, transmission mount, and hardware.  Manufactured from the highest grade American made steel. They're laser cut, precision bent, powder coated and feature...
    $549.99
  • Mount and Crossmember Kit

Includes motor mounts, frame brackets, transmission crossmember, transmission mount, and hardware.  Manufactured from the highest grade American made steel. They're laser cut, precision bent, powder coated and feature polyurethane bushings.  Comes with a lifetime free replacement warranty on the bushings.

    62-67 X-Body | Chevy II/Nova Kit

    LSxEverything

    MSRP: $799.99
    $549.99
    Mount and Crossmember Kit Includes motor mounts, frame brackets, transmission crossmember, transmission mount, and hardware.  Manufactured from the highest grade American made steel. They're laser cut, precision bent, powder coated and feature...
    MSRP: $799.99
    $549.99
  • Front Air-Bag Dropmember - 63-72 C10 Chevy and GMC pickup, bolt-on dropped crossmember assembly for air bags.

Kit includes: main crossmember; upper control arm/bag mounts, motor mounts (specify SBC, BBC, or Gen III), transmission cross-member, shock mounts, billet tie-rod ends and chromoly heims w/hardware, billet rack and pinion mounting bushings, rack notches (weld-in frame for tie-rod clearance), shock mounts, all hardware necessary to install the dropmember.

    63-72 C10 Front Dropmember

    KP Components

    $2,299.99
    Front Air-Bag Dropmember - 63-72 C10 Chevy and GMC pickup, bolt-on dropped crossmember assembly for air bags. Kit includes: main crossmember; upper control arm/bag mounts, motor mounts (specify SBC, BBC, or Gen III), transmission cross-member, shock...
    $2,299.99
  • Bolt-On Parallel 4-Link Coil-Over Suspension for 1963-1972 Chevrolet C10 Pickups - Includes: bolt-on or weld-in axle brackets, panhard bar locater, factory-valved coil-over shocks, and coil-springs. Options: Watts link for 10- or 12-bolt rearend, single- or double-adjustable coil-over shocks, and choice of spring rate based on vehicle load (Light - 175 lb/in, Baseline - 200 lb/in, Heavy - 250 lb/in).
Bolt-On Parallel 4-Link Coil-Over Suspension for 1963-1972 Chevrolet C10 Pickups - Includes: bolt-on or weld-in axle brackets, panhard bar locater, factory-valved coil-over shocks, and coil-springs. Options: Watts link for 10- or 12-bolt rearend, single- or double-adjustable coil-over shocks, and choice of spring rate based on vehicle load (Light - 175 lb/in, Baseline - 200 lb/in, Heavy - 250 lb/in).

    63-72 C10 Truck - Bolt-On 4-Link | Coilover

    KP Components

    MSRP: $3,199.99
    $2,599.99
    Bolt-On Parallel 4-Link Coil-Over Suspension for 1963-1972 Chevrolet C10 Pickups - Includes: bolt-on or weld-in axle brackets, panhard bar locater, factory-valved coil-over shocks, and coil-springs. Options: Watts link for 10- or 12-bolt rearend, single-...
    MSRP: $3,199.99
    $2,599.99
  • C10 guys and gals - now you have another way to get your C10 laid out! Utilizes a complete back-half, engineered to lay frame with less hassle, and can be used as a short bed conversion. The rear end is held by a triangulated 4-link system, with bag on bar. All this is kept inboard, to allow for a 15" wide wheel. All new frame rails from the cab rearward, and includes the rear body mount. This rear body mount is adjustable to be integrated into their body drop kit.

Advantages:

True back-half kit, and serves as a short bed conversion if needed.
Less bolting and cutting to install
Integrated air tank mounts on the notch, setup to work with AccuAir, AVS, Specialty Suspension and Hoosier tanks.
Optional rear splined sway bar
Back is all 3/16" PO steel. The 2"x4" rails itself are 1/8" thick. 
The lower links are 2" DOM 1/4" wall thick. The upper links are 1.5" 1/8" wall.

    63-72 Chevy/GMC Truck Back Half

    Choppin' Block

    MSRP: $4,799.99
    $2,739.99
    C10 guys and gals - now you have another way to get your C10 laid out! Utilizes a complete back-half, engineered to lay frame with less hassle, and can be used as a short bed conversion. The rear end is held by a triangulated 4-link system, with bag...
    MSRP: $4,799.99
    $2,739.99
  • C10 guys and gals - now you have another way to get your C10 laid out! Now you have improved C10 geometry that is engineered to lay frame with less hassle. It will narrow your track width approximately 2.5" per side and moves the wheels 1" forward from the factory location. By utilizing the rack and pinion steering, you get smoother steering to give you a more late model truck driving experience. 

Technical:

Track width aired out, with stock or stock style drop spindle: 57"
Track width with arms parallel to ground, with stock or stock style drop spindle: 61"
LS engines use this oil pan: Click Here
The lower control arms are 1.5", 3/16" wall, and uppers are 1.00", 1/8" wall.

    63-72 Chevy/GMC Truck Front Dropmember

    Choppin' Block

    MSRP: $4,999.99
    $2,899.99
    C10 guys and gals - now you have another way to get your C10 laid out! Now you have improved C10 geometry that is engineered to lay frame with less hassle. It will narrow your track width approximately 2.5" per side and moves the wheels 1" forward from...
    MSRP: $4,999.99
    $2,899.99
  • The Version 7 Dropmember Front suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding. 

ALL DROPMEMBER KITS INCLUDE MOTOR MOUNTS, SHOCK RELOCATE BRACKETS AND RACK & PINION HARDWARE.

ONLY AVAILABLE IN THE LEVEL 1 MILD OR LEVEL 3 EXTREME.

Level 1
When combined with a 2.5” drop spindle and 28” tall tire, the Level 1 Front will set the lowest point of the factory frame rails approx. 3” off the ground when fully deflated.

Level 3
When combined with a 2.5” drop spindle, 29” tall tire, the Level 3 Front will set the lowest point of the factory frame rails on the ground when fully deflated. The Version 7 Dropmember Front suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding. 

ALL DROPMEMBER KITS INCLUDE MOTOR MOUNTS, SHOCK RELOCATE BRACKETS AND RACK & PINION HARDWARE.

ONLY AVAILABLE IN THE LEVEL 1 MILD OR LEVEL 3 EXTREME.

Level 1
When combined with a 2.5” drop spindle and 28” tall tire, the Level 1 Front will set the lowest point of the factory frame rails approx. 3” off the ground when fully deflated.

Level 3
When combined with a 2.5” drop spindle, 29” tall tire, the Level 3 Front will set the lowest point of the factory frame rails on the ground when fully deflated.

    63-72 Dropmember

    Porterbuilt

    MSRP: $2,199.99
    $1,699.99
    The Version 7 Dropmember Front suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding. ALL DROPMEMBER KITS INCLUDE MOTOR MOUNTS, SHOCK...
    MSRP: $2,199.99
    $1,699.99