95lb/hr High Impedance Injectors

95LB AT 43.5 PSI THESE FLOW 103LB/HR IN AN LS RAIL RUNNING 58 PSI FUEL PRESSURE.

STD 60MM TALL

95lb Bosch EV14 High Impedance | Genuine Bosch High Impedance Injectors

These have the LS1 (ev1 Bosch style plugs so no plug adapter is required). These injectors flow 95lbs/hr. at 43.5 PSI (3 BAR) and more at higher PSI. In addition, these units are high-impedance. Despite the high flow rate, they are linear and controllable at low pulse widths and have been used in ULEV applications!

 This allows you to use a larger injector than normally possible without hurting idle and low speed drivability. Adding to the flexibility of application, these units are high-impedance; making them compatible with most ECUs, while delivering the most flow available in a High-Impedance injector.

These injectors represent the most current Bosch engineering and are used on many high power OEM applications. These injectors are able to function at high fuel pressures and don’t exhibit the high fuel pressure handling problems found with many other high flow high-impedance injectors. Many tuners push these injectors to 6 bar and higher.

Engine performance and running quality are enhanced through the optimized spray pattern. Unlike competitors “pencil stream” high flow injectors; these High Flow injectors utilize a multi-orifice tip for improved mixture preparation and atomization.

This results in lower BSFC and better idle quality than many injectors with less flow.

Features:

• Genuine, reliable Bosch Injectors
• Excellent response characteristics
• Robust Design
• High Impedance
• Low Impedance performance characteristics with High Impedance Compatibility
• Specifications: Coil Resistance: 12 Ohms (This high-impedance injector will work with all factory ECM/PCM injector drivers)
• Spray Pattern: Wide Split Cone, (6 orifice) OR SINGLE TIP
• Electrical Connector: USCAR (New-style V=EV6 / Oval / LS2)