null

Ultimate BMW Swap Kit

LSxEverything

(No reviews yet) Write a Review
MSRP: $84,478.96
$62,440.96
(You save $22,038.00 )
SKU:
ULT.BIMMER.ED
UPC:
091234591454
Condition:
New
Availability:
Special Order
Gift wrapping:
Options available
Adding to cart… The item has been added

Product Overview

Ultimate LS Swap Kit for your favorite BMW. Make your Bimmer awesome with real power and reliability!

img-4123.jpgimg-4120.jpg

 

img-4015.jpgimg-4060.jpg

  • LSx Everything Generation IV 6.0 LS Level III with 52k miles
  • Sheet metal intake with fuel injectors & fuel rail
  • Accessory Drive with New Water Pump, Harmonic Balancer, A/C Compressor, Power Steering & Alternator
  • New Spark Plugs, Wires, Braided Crossover Lines
  • New Coil Packs
  • LSx Everything Motor Mounts
  • 1-3/4" Headers
  • New oil pan
  • New Generation IV Harness & ECM
  • New DBW Accelerator Pedal
  • Radiator & Cooling Fans
  • Free Aeromotive Phantom Fuel Pump and Fuel Swap Installation Kit with Regulator, AN Fittings & Fuel Lines
  • Free Push to Start System
  • OK, LSx friends! You are probably dreading going through that old wiring harness and pulling out the various pins and wires and making everything work together yourself.....or worse yet, sending your harness to "Jake" that works at your local insurance company, and does this kind of thing on the side! Well, look no further! We have exactly what you need to get on the road....no more surprises from what you attempted to do, no more lost time pulling pins from the Blue ECM or Green ECM and having to tie them all together or removing a ton of wires (which is what is required).

wiringharnessb.jpg

All that being said, this is the quickest and easiest way to be running and on the road with your LS project. This will work with your crate motor, your junkyard motor, or the transplant from a running candidate in your stable.

The harness is ready to go! All of the unnecessary wires are removed! Only wires essential to your LSx swap running the way it was meant to be.

They’re made with XLP heat and fire resistant wire and new OEM connectors. They include the OBDII diagnostic/tuning port and a weatherproof fuse relay panel with diagram. The woven nylon covering is much better looking, easier to route, and will not wear on other components like factory convoluted tubing.

connectors.jpg


Also included with the kit is an OE engine control module that has been re-flashed to remove all of the unnecessary elements like vehicle anti-theft system (VATS) and secondary o2 sensors.

It is then tuned for a stock to mild camshaft with shift points to work for most builds. If you are running a strange combo or a large camshaft email us for a different pre-program or your final tune can be made on a local tuners dyno. Everything is tested on a running engine before it leaves the factory. Just plug it in and start enjoying your new LS swap! NOTHING COULD BE EASIER!

Warranty Information

Motor has a 2-year limited warranty, transmission has 2 year-24,000 mile warranty. Must have all receipts to provide routine maintenance.

Reviews

(No reviews yet) Write a Review