1963-1965 Chevelle LS Swap/Twin Turbo Kit

(No reviews yet) Write a Review
SKU:
LSXE.LSTTCHEV.6365
On Sale
  • LS Swap Kit/Twin Turbo Kit For 1963-1965 Chevrolet Chevelle 

Kill two birds with one stone! LS Swap your Chevelle AND twin turboit at the same time! 
Note:
Due to Front Grill and Bumper Support Difference, This Kit ONLY Fits 1963-1965 Chevelle, Does NOT Fit 1966+ Chevelle Perfectly. Modification to Intercooler Brackets, and Piping Are Needed if You Try to Fit This Kit on 1966+ Chevelle.


Includes the Following:
- T4 GT35 Turbo x One Pair
- 46 mm WG x One Pair
- Oil Line Kit + Oil Fittings
- Oil Pan
- Engine Mounts
- Manifold x One Pair
- Downpipe x One Pair
- Dump Tube x One Pair
- V-band Clamps x 6 Pcs

Motor Mounts:
- Heavy Duty 7 Gauge (0.18") Thick Stainless Steel Panel, with Brace Offers Strong Support
- Adjustable Slotted Bolt Holes
- Polyurethane Bushing Mounts
- Patented Design of Motor Mount, Excellent Strength
- Works with Chevelle Factory Transmission Mount, Just Need to Move Back By Around 2.5"

Oil Pan:
- Rear Sump Pan
- Built-in with Baffles for High Performance and Race Applications
- 1/2" Thick Aluminum CNC Cut Flange
- AN8 Oil Port Fitting for External Oil Filter and/or Oil Cooler
- Holds 5 1/2 Qt of Oil

T4 GT35 Turbos and Wastegates:
- 4" Air Inlet
- 2.5" Compressed Air Outlet
- Standard T4 Turbine Housing Flange
- 3" Vband Exhaust Outlet
- Journal Bearing
- .70 A/R Compressor
- .68 A/R Turbine
- 46 mm Vband 8 PSI Wastegate

Manifolds:
- Twin T4 Turbo Manifold, Support Dual 44mm or 46mm Wastegate
- 1.65" Runner
- 3" Vband Outlet with 46mm WG Flange

Turbo Elbow:
- T4 Turbo Flange (to Turbo Side)
- 3" Vband FLange (to Header Side)
- Cast 304 Stainless Steel

Downpipe and Dump Tube:
- Dual 3" Vband Downpipe, Fits 3" Vband Turbo Exhaust Housing
- Dual 46mm WG Dump Tube
  • LS Swap Kit/Twin Turbo Kit For 1963-1965 Chevrolet Chevelle 

Kill two birds with one stone! LS Swap your Chevelle AND twin turboit at the same time! 
Note:
Due to Front Grill and Bumper Support Difference, This Kit ONLY Fits 1963-1965 Chevelle, Does NOT Fit 1966+ Chevelle Perfectly. Modification to Intercooler Brackets, and Piping Are Needed if You Try to Fit This Kit on 1966+ Chevelle.


Includes the Following:
- T4 GT35 Turbo x One Pair
- 46 mm WG x One Pair
- Oil Line Kit + Oil Fittings
- Oil Pan
- Engine Mounts
- Manifold x One Pair
- Downpipe x One Pair
- Dump Tube x One Pair
- V-band Clamps x 6 Pcs

Motor Mounts:
- Heavy Duty 7 Gauge (0.18") Thick Stainless Steel Panel, with Brace Offers Strong Support
- Adjustable Slotted Bolt Holes
- Polyurethane Bushing Mounts
- Patented Design of Motor Mount, Excellent Strength
- Works with Chevelle Factory Transmission Mount, Just Need to Move Back By Around 2.5"

Oil Pan:
- Rear Sump Pan
- Built-in with Baffles for High Performance and Race Applications
- 1/2" Thick Aluminum CNC Cut Flange
- AN8 Oil Port Fitting for External Oil Filter and/or Oil Cooler
- Holds 5 1/2 Qt of Oil

T4 GT35 Turbos and Wastegates:
- 4" Air Inlet
- 2.5" Compressed Air Outlet
- Standard T4 Turbine Housing Flange
- 3" Vband Exhaust Outlet
- Journal Bearing
- .70 A/R Compressor
- .68 A/R Turbine
- 46 mm Vband 8 PSI Wastegate

Manifolds:
- Twin T4 Turbo Manifold, Support Dual 44mm or 46mm Wastegate
- 1.65" Runner
- 3" Vband Outlet with 46mm WG Flange

Turbo Elbow:
- T4 Turbo Flange (to Turbo Side)
- 3" Vband FLange (to Header Side)
- Cast 304 Stainless Steel

Downpipe and Dump Tube:
- Dual 3" Vband Downpipe, Fits 3" Vband Turbo Exhaust Housing
- Dual 46mm WG Dump Tube
  • LS Swap Kit/Twin Turbo Kit For 1963-1965 Chevrolet Chevelle 

Kill two birds with one stone! LS Swap your Chevelle AND twin turboit at the same time! 
Note:
Due to Front Grill and Bumper Support Difference, This Kit ONLY Fits 1963-1965 Chevelle, Does NOT Fit 1966+ Chevelle Perfectly. Modification to Intercooler Brackets, and Piping Are Needed if You Try to Fit This Kit on 1966+ Chevelle.


Includes the Following:
- T4 GT35 Turbo x One Pair
- 46 mm WG x One Pair
- Oil Line Kit + Oil Fittings
- Oil Pan
- Engine Mounts
- Manifold x One Pair
- Downpipe x One Pair
- Dump Tube x One Pair
- V-band Clamps x 6 Pcs

Motor Mounts:
- Heavy Duty 7 Gauge (0.18") Thick Stainless Steel Panel, with Brace Offers Strong Support
- Adjustable Slotted Bolt Holes
- Polyurethane Bushing Mounts
- Patented Design of Motor Mount, Excellent Strength
- Works with Chevelle Factory Transmission Mount, Just Need to Move Back By Around 2.5"

Oil Pan:
- Rear Sump Pan
- Built-in with Baffles for High Performance and Race Applications
- 1/2" Thick Aluminum CNC Cut Flange
- AN8 Oil Port Fitting for External Oil Filter and/or Oil Cooler
- Holds 5 1/2 Qt of Oil

T4 GT35 Turbos and Wastegates:
- 4" Air Inlet
- 2.5" Compressed Air Outlet
- Standard T4 Turbine Housing Flange
- 3" Vband Exhaust Outlet
- Journal Bearing
- .70 A/R Compressor
- .68 A/R Turbine
- 46 mm Vband 8 PSI Wastegate

Manifolds:
- Twin T4 Turbo Manifold, Support Dual 44mm or 46mm Wastegate
- 1.65" Runner
- 3" Vband Outlet with 46mm WG Flange

Turbo Elbow:
- T4 Turbo Flange (to Turbo Side)
- 3" Vband FLange (to Header Side)
- Cast 304 Stainless Steel

Downpipe and Dump Tube:
- Dual 3" Vband Downpipe, Fits 3" Vband Turbo Exhaust Housing
- Dual 46mm WG Dump Tube
  • LS Swap Kit/Twin Turbo Kit For 1963-1965 Chevrolet Chevelle 

Kill two birds with one stone! LS Swap your Chevelle AND twin turboit at the same time! 
Note:
Due to Front Grill and Bumper Support Difference, This Kit ONLY Fits 1963-1965 Chevelle, Does NOT Fit 1966+ Chevelle Perfectly. Modification to Intercooler Brackets, and Piping Are Needed if You Try to Fit This Kit on 1966+ Chevelle.


Includes the Following:
- T4 GT35 Turbo x One Pair
- 46 mm WG x One Pair
- Oil Line Kit + Oil Fittings
- Oil Pan
- Engine Mounts
- Manifold x One Pair
- Downpipe x One Pair
- Dump Tube x One Pair
- V-band Clamps x 6 Pcs

Motor Mounts:
- Heavy Duty 7 Gauge (0.18") Thick Stainless Steel Panel, with Brace Offers Strong Support
- Adjustable Slotted Bolt Holes
- Polyurethane Bushing Mounts
- Patented Design of Motor Mount, Excellent Strength
- Works with Chevelle Factory Transmission Mount, Just Need to Move Back By Around 2.5"

Oil Pan:
- Rear Sump Pan
- Built-in with Baffles for High Performance and Race Applications
- 1/2" Thick Aluminum CNC Cut Flange
- AN8 Oil Port Fitting for External Oil Filter and/or Oil Cooler
- Holds 5 1/2 Qt of Oil

T4 GT35 Turbos and Wastegates:
- 4" Air Inlet
- 2.5" Compressed Air Outlet
- Standard T4 Turbine Housing Flange
- 3" Vband Exhaust Outlet
- Journal Bearing
- .70 A/R Compressor
- .68 A/R Turbine
- 46 mm Vband 8 PSI Wastegate

Manifolds:
- Twin T4 Turbo Manifold, Support Dual 44mm or 46mm Wastegate
- 1.65" Runner
- 3" Vband Outlet with 46mm WG Flange

Turbo Elbow:
- T4 Turbo Flange (to Turbo Side)
- 3" Vband FLange (to Header Side)
- Cast 304 Stainless Steel

Downpipe and Dump Tube:
- Dual 3" Vband Downpipe, Fits 3" Vband Turbo Exhaust Housing
- Dual 46mm WG Dump Tube
  • LS Swap Kit/Twin Turbo Kit For 1963-1965 Chevrolet Chevelle 

Kill two birds with one stone! LS Swap your Chevelle AND twin turboit at the same time! 
Note:
Due to Front Grill and Bumper Support Difference, This Kit ONLY Fits 1963-1965 Chevelle, Does NOT Fit 1966+ Chevelle Perfectly. Modification to Intercooler Brackets, and Piping Are Needed if You Try to Fit This Kit on 1966+ Chevelle.


Includes the Following:
- T4 GT35 Turbo x One Pair
- 46 mm WG x One Pair
- Oil Line Kit + Oil Fittings
- Oil Pan
- Engine Mounts
- Manifold x One Pair
- Downpipe x One Pair
- Dump Tube x One Pair
- V-band Clamps x 6 Pcs

Motor Mounts:
- Heavy Duty 7 Gauge (0.18") Thick Stainless Steel Panel, with Brace Offers Strong Support
- Adjustable Slotted Bolt Holes
- Polyurethane Bushing Mounts
- Patented Design of Motor Mount, Excellent Strength
- Works with Chevelle Factory Transmission Mount, Just Need to Move Back By Around 2.5"

Oil Pan:
- Rear Sump Pan
- Built-in with Baffles for High Performance and Race Applications
- 1/2" Thick Aluminum CNC Cut Flange
- AN8 Oil Port Fitting for External Oil Filter and/or Oil Cooler
- Holds 5 1/2 Qt of Oil

T4 GT35 Turbos and Wastegates:
- 4" Air Inlet
- 2.5" Compressed Air Outlet
- Standard T4 Turbine Housing Flange
- 3" Vband Exhaust Outlet
- Journal Bearing
- .70 A/R Compressor
- .68 A/R Turbine
- 46 mm Vband 8 PSI Wastegate

Manifolds:
- Twin T4 Turbo Manifold, Support Dual 44mm or 46mm Wastegate
- 1.65" Runner
- 3" Vband Outlet with 46mm WG Flange

Turbo Elbow:
- T4 Turbo Flange (to Turbo Side)
- 3" Vband FLange (to Header Side)
- Cast 304 Stainless Steel

Downpipe and Dump Tube:
- Dual 3" Vband Downpipe, Fits 3" Vband Turbo Exhaust Housing
- Dual 46mm WG Dump Tube
  • LS Swap Kit/Twin Turbo Kit For 1963-1965 Chevrolet Chevelle 

Kill two birds with one stone! LS Swap your Chevelle AND twin turboit at the same time! 
Note:
Due to Front Grill and Bumper Support Difference, This Kit ONLY Fits 1963-1965 Chevelle, Does NOT Fit 1966+ Chevelle Perfectly. Modification to Intercooler Brackets, and Piping Are Needed if You Try to Fit This Kit on 1966+ Chevelle.


Includes the Following:
- T4 GT35 Turbo x One Pair
- 46 mm WG x One Pair
- Oil Line Kit + Oil Fittings
- Oil Pan
- Engine Mounts
- Manifold x One Pair
- Downpipe x One Pair
- Dump Tube x One Pair
- V-band Clamps x 6 Pcs

Motor Mounts:
- Heavy Duty 7 Gauge (0.18") Thick Stainless Steel Panel, with Brace Offers Strong Support
- Adjustable Slotted Bolt Holes
- Polyurethane Bushing Mounts
- Patented Design of Motor Mount, Excellent Strength
- Works with Chevelle Factory Transmission Mount, Just Need to Move Back By Around 2.5"

Oil Pan:
- Rear Sump Pan
- Built-in with Baffles for High Performance and Race Applications
- 1/2" Thick Aluminum CNC Cut Flange
- AN8 Oil Port Fitting for External Oil Filter and/or Oil Cooler
- Holds 5 1/2 Qt of Oil

T4 GT35 Turbos and Wastegates:
- 4" Air Inlet
- 2.5" Compressed Air Outlet
- Standard T4 Turbine Housing Flange
- 3" Vband Exhaust Outlet
- Journal Bearing
- .70 A/R Compressor
- .68 A/R Turbine
- 46 mm Vband 8 PSI Wastegate

Manifolds:
- Twin T4 Turbo Manifold, Support Dual 44mm or 46mm Wastegate
- 1.65" Runner
- 3" Vband Outlet with 46mm WG Flange

Turbo Elbow:
- T4 Turbo Flange (to Turbo Side)
- 3" Vband FLange (to Header Side)
- Cast 304 Stainless Steel

Downpipe and Dump Tube:
- Dual 3" Vband Downpipe, Fits 3" Vband Turbo Exhaust Housing
- Dual 46mm WG Dump Tube
  • LS Swap Kit/Twin Turbo Kit For 1963-1965 Chevrolet Chevelle 

Kill two birds with one stone! LS Swap your Chevelle AND twin turboit at the same time! 
Note:
Due to Front Grill and Bumper Support Difference, This Kit ONLY Fits 1963-1965 Chevelle, Does NOT Fit 1966+ Chevelle Perfectly. Modification to Intercooler Brackets, and Piping Are Needed if You Try to Fit This Kit on 1966+ Chevelle.


Includes the Following:
- T4 GT35 Turbo x One Pair
- 46 mm WG x One Pair
- Oil Line Kit + Oil Fittings
- Oil Pan
- Engine Mounts
- Manifold x One Pair
- Downpipe x One Pair
- Dump Tube x One Pair
- V-band Clamps x 6 Pcs

Motor Mounts:
- Heavy Duty 7 Gauge (0.18") Thick Stainless Steel Panel, with Brace Offers Strong Support
- Adjustable Slotted Bolt Holes
- Polyurethane Bushing Mounts
- Patented Design of Motor Mount, Excellent Strength
- Works with Chevelle Factory Transmission Mount, Just Need to Move Back By Around 2.5"

Oil Pan:
- Rear Sump Pan
- Built-in with Baffles for High Performance and Race Applications
- 1/2" Thick Aluminum CNC Cut Flange
- AN8 Oil Port Fitting for External Oil Filter and/or Oil Cooler
- Holds 5 1/2 Qt of Oil

T4 GT35 Turbos and Wastegates:
- 4" Air Inlet
- 2.5" Compressed Air Outlet
- Standard T4 Turbine Housing Flange
- 3" Vband Exhaust Outlet
- Journal Bearing
- .70 A/R Compressor
- .68 A/R Turbine
- 46 mm Vband 8 PSI Wastegate

Manifolds:
- Twin T4 Turbo Manifold, Support Dual 44mm or 46mm Wastegate
- 1.65" Runner
- 3" Vband Outlet with 46mm WG Flange

Turbo Elbow:
- T4 Turbo Flange (to Turbo Side)
- 3" Vband FLange (to Header Side)
- Cast 304 Stainless Steel

Downpipe and Dump Tube:
- Dual 3" Vband Downpipe, Fits 3" Vband Turbo Exhaust Housing
- Dual 46mm WG Dump Tube
  • LS Swap Kit/Twin Turbo Kit For 1963-1965 Chevrolet Chevelle 

Kill two birds with one stone! LS Swap your Chevelle AND twin turboit at the same time! 
Note:
Due to Front Grill and Bumper Support Difference, This Kit ONLY Fits 1963-1965 Chevelle, Does NOT Fit 1966+ Chevelle Perfectly. Modification to Intercooler Brackets, and Piping Are Needed if You Try to Fit This Kit on 1966+ Chevelle.


Includes the Following:
- T4 GT35 Turbo x One Pair
- 46 mm WG x One Pair
- Oil Line Kit + Oil Fittings
- Oil Pan
- Engine Mounts
- Manifold x One Pair
- Downpipe x One Pair
- Dump Tube x One Pair
- V-band Clamps x 6 Pcs

Motor Mounts:
- Heavy Duty 7 Gauge (0.18") Thick Stainless Steel Panel, with Brace Offers Strong Support
- Adjustable Slotted Bolt Holes
- Polyurethane Bushing Mounts
- Patented Design of Motor Mount, Excellent Strength
- Works with Chevelle Factory Transmission Mount, Just Need to Move Back By Around 2.5"

Oil Pan:
- Rear Sump Pan
- Built-in with Baffles for High Performance and Race Applications
- 1/2" Thick Aluminum CNC Cut Flange
- AN8 Oil Port Fitting for External Oil Filter and/or Oil Cooler
- Holds 5 1/2 Qt of Oil

T4 GT35 Turbos and Wastegates:
- 4" Air Inlet
- 2.5" Compressed Air Outlet
- Standard T4 Turbine Housing Flange
- 3" Vband Exhaust Outlet
- Journal Bearing
- .70 A/R Compressor
- .68 A/R Turbine
- 46 mm Vband 8 PSI Wastegate

Manifolds:
- Twin T4 Turbo Manifold, Support Dual 44mm or 46mm Wastegate
- 1.65" Runner
- 3" Vband Outlet with 46mm WG Flange

Turbo Elbow:
- T4 Turbo Flange (to Turbo Side)
- 3" Vband FLange (to Header Side)
- Cast 304 Stainless Steel

Downpipe and Dump Tube:
- Dual 3" Vband Downpipe, Fits 3" Vband Turbo Exhaust Housing
- Dual 46mm WG Dump Tube
  • Motor Mounts
  • Motor Mounts
MSRP: $3,999.99
Now: $3,299.99
Was: $3,899.99
— You save $700.00

Description

LS Swap Kit/Twin Turbo Kit For 1963-1965 Chevrolet Chevelle 

Kill two birds with one stone! LS Swap your Chevelle AND twin turbo it at the same time! 

Includes the Following:
- T4 GT35 Turbo x One Pair
- 46 mm WG x One Pair
- Oil Line Kit + Oil Fittings
- Oil Pan
- Engine Mounts
- Manifold x One Pair
- Downpipe x One Pair
- Dump Tube x One Pair
- V-band Clamps x 6 Pcs

Motor Mounts:
- Heavy Duty 7 Gauge (0.18") Thick Stainless Steel Panel, with Brace Offers Strong Support
- Adjustable Slotted Bolt Holes
- Polyurethane Bushing Mounts
- Patented Design of Motor Mount, Excellent Strength
- Works with Chevelle Factory Transmission Mount, Just Need to Move Back By Around 2.5"

Oil Pan:
- Rear Sump Pan
- Built-in with Baffles for High Performance and Race Applications
- 1/2" Thick Aluminum CNC Cut Flange
- AN8 Oil Port Fitting for External Oil Filter and/or Oil Cooler
- Holds 5 1/2 Qt of Oil

T4 GT35 Turbos and Wastegates:
- 4" Air Inlet
- 2.5" Compressed Air Outlet
- Standard T4 Turbine Housing Flange
- 3" Vband Exhaust Outlet
- Journal Bearing
- .70 A/R Compressor
- .68 A/R Turbine
- 46 mm Vband 8 PSI Wastegate

Manifolds:
- Twin T4 Turbo Manifold, Support Dual 44mm or 46mm Wastegate
- 1.65" Runner
- 3" Vband Outlet with 46mm WG Flange

Turbo Elbow:
- T4 Turbo Flange (to Turbo Side)
- 3" Vband FLange (to Header Side)
- Cast 304 Stainless Steel

Downpipe and Dump Tube:
- Dual 3" Vband Downpipe, Fits 3" Vband Turbo Exhaust Housing
- Dual 46mm WG Dump Tube



View AllClose

Warranty Information

Note: Due to Front Grill and Bumper Support Difference, This Kit ONLY Fits 1963-1965 Chevelle, Does NOT Fit 1966+ Chevelle Perfectly. Modification to Intercooler Brackets, and Piping Are Needed if You Try to Fit This Kit on 1966+ Chevelle.
View AllClose