63-72 Chevy/GMC Truck Back Half

C10 guys and gals - now you have another way to get your C10 laid out! Utilizes a complete back-half, engineered to lay frame with less hassle, and can be used as a short bed conversion. The rear end is held by a triangulated 4-link system, with bag on bar. All this is kept inboard, to allow for a 15" wide wheel. All new frame rails from the cab rearward, and includes the rear body mount. This rear body mount is adjustable to be integrated into their body drop kit.

Advantages:

True back-half kit, and serves as a short bed conversion if needed.
Less bolting and cutting to install
Integrated air tank mounts on the notch, setup to work with AccuAir, AVS, Specialty Suspension and Hoosier tanks.
Optional rear splined sway bar
Back is all 3/16" PO steel. The 2"x4" rails itself are 1/8" thick.
The lower links are 2" DOM 1/4" wall thick. The upper links are 1.5" 1/8" wall.

Kit Includes the Following:

Back-half frame rails with notch
Bridge assembly with air tank mounts
Triangulated 4-link bars
Link crossmember
Rear cab mount
KYB shocks

Add-On Items:

1.00" Solid Splined Sway Bar
Aluminum Fuel cell (.125" material)
Battery boxes

Note:

Ride height with 30" tall tire is appx. 5.5"-6", and with a 28" tall tire would be appx. 4.5"-5"