Site Information

shop by Category

CONNECT WITH US

 Loading... Please wait...
  • The Version 7 Dropmember Front suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding. 

ALL DROPMEMBER KITS INCLUDE MOTOR MOUNTS, SHOCK RELOCATE BRACKETS AND RACK & PINION HARDWARE.

ONLY AVAILABLE IN THE LEVEL 1 MILD OR LEVEL 3 EXTREME.

Level 1
When combined with a 2.5” drop spindle and 28” tall tire, the Level 1 Front will set the lowest point of the factory frame rails approx. 3” off the ground when fully deflated.

Level 3
When combined with a 2.5” drop spindle, 29” tall tire, the Level 3 Front will set the lowest point of the factory frame rails on the ground when fully deflated.
  • The Version 7 Dropmember Front suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding. 

ALL DROPMEMBER KITS INCLUDE MOTOR MOUNTS, SHOCK RELOCATE BRACKETS AND RACK & PINION HARDWARE.

ONLY AVAILABLE IN THE LEVEL 1 MILD OR LEVEL 3 EXTREME.

Level 1
When combined with a 2.5” drop spindle and 28” tall tire, the Level 1 Front will set the lowest point of the factory frame rails approx. 3” off the ground when fully deflated.

Level 3
When combined with a 2.5” drop spindle, 29” tall tire, the Level 3 Front will set the lowest point of the factory frame rails on the ground when fully deflated.
  • Level 1 Laid Out
When combined with a 2.5” drop spindle and 28” tall tire, the Level 1 Front will set the lowest point of the factory frame rails approx. 3” off the ground when fully deflated. The Level 1 is only compatible with Porterbuilt Tubular Control Arms. The Level 1 requires the use of a 30" column.
  • Level 1 Ride Height
When combined with a 2.5” drop spindle and 28” tall tire, the Level 1 Front will set the lowest point of the factory frame rails approx. 3” off the ground when fully deflated. The Level 1 is only compatible with Porterbuilt Tubular Control Arms. The Level 1 requires the use of a 30" column.
  • Level 3 Laid Out

When combined with a 2.5” drop spindle, 29” tall tire, the Level 3 Front will set the lowest point of the factory frame rails on the ground when fully deflated.
The Dropmember Level 3 Front suspension system is designed to replace the factory cross-member and steering system. Engineered as a modular bolt-in unit, its advantages include:

- Revised suspension geometry for improved performance and ride quality
- Rack and pinion steering for increased steering response
- Proper wheel center-line placement (sets the wheel center-line in the middle of the wheel well opening for a more balanced look)
- Narrowed trac-width (Level 3 narrows the trac-width approx. 1.25” per side)
- Added ground clearance over factory components
When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 3 Front will set the lowest point of the factory frame rails on the ground when fully deflated.

The Level 3 is ONLY compatible with Porterbuilt Tubular Control Arms.
When running the Level 3 Front, the engine placement is moved forward and up from its factory location. Designed to be paired with our Dropmember Level 3 Rear.
  • Level 3 Ride Height
The Dropmember Level 3 Front suspension system is designed to replace the factory cross-member and steering system. Engineered as a modular bolt-in unit, its advantages include:

- Revised suspension geometry for improved performance and ride quality
- Rack and pinion steering for increased steering response
- Proper wheel center-line placement (sets the wheel center-line in the middle of the wheel well opening for a more balanced look)
- Narrowed trac-width (Level 3 narrows the trac-width approx. 1.25” per side)
- Added ground clearance over factory components
When combined with a 2.5” drop spindle, 29” tall tire, and Porterbuilt Tubular Control Arms, the Level 3 Front will set the lowest point of the factory frame rails on the ground when fully deflated.

The Level 3 is ONLY compatible with Porterbuilt Tubular Control Arms.

When running the Level 3 Front, the engine placement is moved forward and up from its factory location.
  • The Version 7 Dropmember Front suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding. 

ALL DROPMEMBER KITS INCLUDE MOTOR MOUNTS, SHOCK RELOCATE BRACKETS AND RACK & PINION HARDWARE.

ONLY AVAILABLE IN THE LEVEL 1 MILD OR LEVEL 3 EXTREME.

Level 1
When combined with a 2.5” drop spindle and 28” tall tire, the Level 1 Front will set the lowest point of the factory frame rails approx. 3” off the ground when fully deflated.

Level 3
When combined with a 2.5” drop spindle, 29” tall tire, the Level 3 Front will set the lowest point of the factory frame rails on the ground when fully deflated.
  • The Version 7 Dropmember Front suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding. 

ALL DROPMEMBER KITS INCLUDE MOTOR MOUNTS, SHOCK RELOCATE BRACKETS AND RACK & PINION HARDWARE.

ONLY AVAILABLE IN THE LEVEL 1 MILD OR LEVEL 3 EXTREME.

Level 1
When combined with a 2.5” drop spindle and 28” tall tire, the Level 1 Front will set the lowest point of the factory frame rails approx. 3” off the ground when fully deflated.

Level 3
When combined with a 2.5” drop spindle, 29” tall tire, the Level 3 Front will set the lowest point of the factory frame rails on the ground when fully deflated.The Version 7 Dropmember Front suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding. 

ALL DROPMEMBER KITS INCLUDE MOTOR MOUNTS, SHOCK RELOCATE BRACKETS AND RACK & PINION HARDWARE.

ONLY AVAILABLE IN THE LEVEL 1 MILD OR LEVEL 3 EXTREME.

Level 1
When combined with a 2.5” drop spindle and 28” tall tire, the Level 1 Front will set the lowest point of the factory frame rails approx. 3” off the ground when fully deflated.

Level 3
When combined with a 2.5” drop spindle, 29” tall tire, the Level 3 Front will set the lowest point of the factory frame rails on the ground when fully deflated.
  • The Version 7 Dropmember Front suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding. 

ALL DROPMEMBER KITS INCLUDE MOTOR MOUNTS, SHOCK RELOCATE BRACKETS AND RACK & PINION HARDWARE.

ONLY AVAILABLE IN THE LEVEL 1 MILD OR LEVEL 3 EXTREME.

Level 1
When combined with a 2.5” drop spindle and 28” tall tire, the Level 1 Front will set the lowest point of the factory frame rails approx. 3” off the ground when fully deflated.

Level 3
When combined with a 2.5” drop spindle, 29” tall tire, the Level 3 Front will set the lowest point of the factory frame rails on the ground when fully deflated.
  • The Version 7 Dropmember Front suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding. 

ALL DROPMEMBER KITS INCLUDE MOTOR MOUNTS, SHOCK RELOCATE BRACKETS AND RACK & PINION HARDWARE.

ONLY AVAILABLE IN THE LEVEL 1 MILD OR LEVEL 3 EXTREME.

Level 1
When combined with a 2.5” drop spindle and 28” tall tire, the Level 1 Front will set the lowest point of the factory frame rails approx. 3” off the ground when fully deflated.

Level 3
When combined with a 2.5” drop spindle, 29” tall tire, the Level 3 Front will set the lowest point of the factory frame rails on the ground when fully deflated.

63-72 Dropmember

$2,199.99 $1,699.99
(You save $500.00)

Choose Your Options

SKU:
LSXE.PBDROPMR6372.342
Gift Wrapping:
Options available
* Motor Mounts:
* Dropmember Type:
Quantity:

Product Description

The Version 7 Dropmember Front suspension system is designed to replace the factory cross-member and steering system. It is engineered as a modular bolt-in unit that requires no welding. ALL DROPMEMBER KITS INCLUDE MOTOR MOUNTS, SHOCK RELOCATE BRACKETS AND RACK & PINION HARDWARE.

ONLY AVAILABLE IN THE LEVEL 1 MILD OR LEVEL 3 EXTREME.

Level 1
When combined with a 2.5” drop spindle and 28” tall tire, the Level 1 Front will set the lowest point of the factory frame rails approx. 3” off the ground when fully deflated.

Level 3
When combined with a 2.5” drop spindle, 29” tall tire, the Level 3 Front will set the lowest point of the factory frame rails on the ground when fully deflated.

Version 7 All

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

Warranty Information

Basic Kit Includes:
- Main crossmember assembly
- Inner truss support system
- Motor mounts (SBC and GEN3 are available)
- Shock relocation brackets
- Rack & pinion hardware
- Grade 8 hardware for installation

Find Similar Products by Category