Product Overview
LS Swap Kit for the Land Rover Vehicles
This kit includes the following:
- GEN IV 6.0 or 6.2 LS Level III {Color Choice Optional}
- Choice of 4L80E or 6L80E/6L90E Transmission & Torque Converter
- Black sheet metal intake with fuel injectors & fuel rail
- Ceramic Coated Headers
- New oil pan
- Accessory Drive with New Water Pump, A/C Compressor, Power Steering & Alternator
- NEW GEN IV Harness & ECM/TCM
- NEW Accelerator Pedal
- LS Swap Kit/4L80e/6L80e
- Radiator & Cooling Fans
- Phantom Fuel Pump
- Racepak Gauge Kit
Warranty Information
NOTE. The automatic transmission and adaptor is longer than the transmission being replaced. For this reason drive shafts and transfer case mountings will require modification. Refit front drive shaft and check the clearance between it and the side of the automatic transmission sump. Modify the sump if required by removing the corner section. NOTE. When modifying an automatic sump make sure that the modifications do not interfere with the valve body.
All automatic transmissions require the use of a suitable transmission cooler. This can either be incorporated into the original radiator or a remote type can be used. The transmission shift mechanism can either be an after market Hurst or B&M floor shifter. Alternatively a T-bar set up can be used from an automatic Range Rover with modification
